AW-5042 H18 Aluminum Alloy – EN 573-3 Certified Food‑Safe Grade
Naturally hard AlMg alloy. The alloy is food safe.
Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.67 g/cm³ | H18 | EN 573-3, EN 485, EN 541 |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 20.0 °C | 330.0 - 380.0 MPa | H18 | EN 573-3, EN 485, EN 541 | Sheet | |
20.0 °C | 330.0 - 380.0 MPa | H18 | EN 573-3 | Flat | Transverse |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium |
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium |
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 112.0 - 205.0 W/(m·K) | Typical for Wrought 5000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 18000000.0 - 31000000.0 S/m | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Copper | 0.15 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Iron | 0.35 % | H18 | EN 573-3 | Sheet, Flat |
0.35 % | H18 | EN 573-3, EN 485, EN 541 | ||
Magnesium | 3.0 - 4.0 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Manganese | 0.2 - 0.5 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Silicon | 0.2 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Titanium | 0.1 | H18 | EN 573-3 | Sheet, Flat |
Zinc | 0.25 % | H18 | EN 573-3, EN 485, EN 541 | Sheet, Flat |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- AW-8014 H18 (EN 573-3) – Food‑Safe, High‑Strength AlFeMn Alloy
- AW-8021B H18 Aluminum Alloy – EN 573-3 Certified, Food Safe & High Strength
- AW-8111 H18 AlFeSi Alloy – EN 573-3 Certified Food‑Safe Aluminium
- AW-8008 H18 – Premium Food‑Safe AlFeMn Alloy, EN 573-3 Certified
- AW-5042 H44 - Food-Safe, High-Strength Aluminium Alloy (EN 573-3 Grade)
- AW-5042 H19 AlMg Alloy – EN 573-3 Certified, Food‑Safe 5000 Series
- AW-6082 H18 Aluminum Alloy – EN 573-3 Certified, Food‑Safe, High‑Strength Age‑Hardenable
- AW-6060 H18: Food‑Safe, Age‑Hardenable AlMgSi Alloy for High‑Performance Applications
- AW-4115 H18 – EN 573-3 Certified 4000 Series AlSi Alloy
- AW-5010 H18 (EN 573-3) High-Strength Al‑Mg Alloy – Specifications & Properties