EN 1706 AC-42200 T64 Aluminium Casting Alloy – Premium Properties
Aluminium casting alloy (sand casting, permanent mould casting, investment casting)
Properties
General
| Property | Temperature | Value | Condition | Related Standards |
|---|---|---|---|---|
Density | 20.0 °C | 2.66 g/cm³ | T64 | EN 1706 |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Bending Fatigue Strength | 80.0 - 110.0 MPa | T64 | EN 1706, EN 13195 | Casting | ||
Elastic modulus | 20.0 °C | 69.0 - 75.0 GPa | T64 | EN 1706 | ||
Hardness, Brinell | 90.0 [-] | T64 | EN 1706, EN 13195 | Casting | ||
20.0 °C | 90.0 [-] | T64 | EN 1706 | |||
Poisson's ratio | 0.33 [-] | Typical for Cast 3xx.x Series Aluminium | ||||
Shear modulus | 2.8 GPa | Typical for Cast 3xx.x Series Aluminium | ||||
Tensile strength | 290.0 MPa | T64 | EN 1706, EN 13195 | Casting | ||
20.0 °C | 290.0 MPa | T64 | EN 1706 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.2e-05 1/K | T64 | EN 1706, EN 13195 | Casting | |
100.0 °C | 2.2e-05 1/K | T64 | EN 1706, EN 13195 | Casting | ||
100 °C | 2.2e-05 1/K | T64 | EN 1706, EN 13195 | Casting | ||
Melting point | 505.0 - 770.0 °C | Typical for Cast 3xx.x Series Aluminium | ||||
Specific heat capacity | 960.0 - 963.0 J/(kg·K) | Typical for Cast 3xx.x Series Aluminium | ||||
Thermal conductivity | 20.0 °C | 150.0 - 180.0 W/(m·K) | T64 | EN 1706, EN 13195 | Casting |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 20000000.0 - 26000000.0 S/m | T64 | EN 1706, EN 13195 | Casting |
Electrical resistivity | 3.85e-08 - 5e-08 Ω·m | T64 | EN 1706, EN 13195 | Casting |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Aluminium | 91.04 % | T64 | EN 1706 | |
Copper | 0.05 % | T64 | EN 1706, EN 13195 | Casting |
Iron | 0.19 % | T64 | EN 1706 | |
0.19 % | T64 | EN 1706, EN 13195 | Casting | |
Magnesium | 0.45 - 0.7 % | T64 | EN 1706, EN 13195 | Casting |
Manganese | 0.1 % | T64 | EN 1706, EN 13195 | Casting |
Silicon | 6.5 - 7.5 % | T64 | EN 1706, EN 13195 | Casting |
Titanium | 0.08 - 0.25 % | T64 | EN 1706, EN 13195 | Casting |
Zinc | 0.07 % | T64 | EN 1706, EN 13195 | Casting |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: not sufficient | |
| Corrosion properties | general: good | |
| General machinability | as cast: good | |
| Processing methods | permanent mould casting, separately cast test sample | |
Metal
- EN 1706 Grade 3.1841 T64 Aluminium Alloy – Key Properties & Standards
- AC-43300 T64 Aluminium Alloy – EN 1706 Grade with Enhanced Mechanical Properties
- EN 1706 Grade 3.2373 T64 Aluminium Alloy – Key Mechanical Properties & Standards
- EN 1706 Grade 3.2381 T64: Detailed Mechanical & Physical Properties
- EN 1706 AC-21100 T64 Aluminium Casting Alloy – Specifications & Properties
- EN 1706 Grade AC-43100 T64 Aluminium Alloy: Properties & Standards
- AC-42100 T64 Aluminium Alloy – EN 1706 Certified Grade
- EN 1706 Grade AC-42200 T6 Aluminium Casting Alloy – High-Performance Properties
- EN 1706 Certified AC-43000 T64 Aluminium Alloy – Ideal for Sand & Permanent Mould Casting
- EN 1706 Grade AC-42000 T64 Aluminium Casting Alloy – Key Properties & Standards