EN 573-3 Grade AW-3005 H48: Food‑Safe AlMn Alloy for Engineering Applications
Naturally hard AlMn alloy. The alloy is food safe.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.72 g/cm³ | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
20.0 °C | 2.72 g/cm³ | H48 | EN 573-3 | Sheet, Strip |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 3000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 26.5 | H48 | EN 573-3 | Sheet, Strip | |
Tensile strength | 210.0 MPa | H48 | EN 573-3, EN 1396 | Strip, Sheet, Plate, Welded Tube | ||
20.0 °C | 210.0 MPa | H48 | EN 573-3 | Sheet, Strip | Transverse | |
20.0 °C | 210.0 - 250.0 MPa | H48 | EN 573-3, EN 541 | Sheet, Strip, Plate, Welded Tube | ||
20.0 °C | 210.0 MPa | H48 | EN 573-3 | Sheet, Strip |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3199999999999998e-05 1/K | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube |
100 °C | 2.3199999999999998e-05 1/K | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
Melting point | 630.0 - 654.0 °C | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
Specific heat capacity | 20.0 °C | 893.0 J/(kg·K) | H48 | EN 573-3 | Sheet, Strip |
Thermal conductivity | 160.0 - 190.0 W/(m·K) | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
20.0 °C | 200.0 W/(m·K) | H48 | EN 573-3 | Sheet, Strip |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 23000000.0 - 25000000.0 S/m | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
20.0 °C | 28000000.0 S/m | H48 | EN 573-3 | Sheet, Strip | |
Electrical resistivity | 4e-08 - 4.35e-08 Ω·m | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Copper | 0.3 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Iron | 0.7 % | H48 | EN 573-3 | Sheet, Strip |
0.70 % | H48 | EN 573-3, EN 1396, EN 541 | Strip, Sheet, Plate, Welded Tube | |
Magnesium | 0.2 - 0.6 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Manganese | 1.0 - 1.5 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Silicon | 0.6 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Titanium | 0.1 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Zinc | 0.25 % | H48 | EN 573-3, EN 1396, EN 541 | Sheet, Strip, Plate, Welded Tube |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: very good | |
| Corrosion properties | Seawater: very good, weathering: very good | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12) | |
Metal
- EN 573-3 Grade 3.0505 H48 – Premium Aluminium Alloy Properties
- EN 573-3 Grade 3.3316 H48 Aluminum Alloy – Key Properties & Standards
- EN 573-3 Grade 3.3549 H48 – Premium Aluminium Alloy for Structural Applications
- EN 573-3 Grade 3.0515 H48 – Key Mechanical Properties & Standards
- EN 573-3 Grade AW-3005 H34 – Premium Aluminium Alloy for Industrial Use
- AW-3005 H36 Aluminium Alloy – EN 573-3 Grade, High-Strength & Versatile
- AW-3005 H38 – EN 573-3 Grade Aluminium Alloy
- EN 573-3 Grade 3.0525 H48 – Comprehensive Aluminum Alloy Specifications
- EN 573-3 Grade 3.0526 H48 – High Strength Aluminium Alloy Specifications
- AW-3005 F Aluminium Alloy – EN 573-3 Grade, Food Safe, High Strength