EN 573-3 Grade AW‑5052 H244 Aluminum – Superior Corrosion Resistance & Weldability
Aluminum EN AW-5052 is a non-heat treatable alloy with excellent finishing qualities. EN AW-5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the best welding characteristics of all aluminum alloys.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.68 g/cm³ | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Bending angle 90° | 2.0 °/t | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
2.5 °/t | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
3.0 °/t | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Elastic modulus | 70.0 GPa | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | |||
Shear modulus | 26.3 GPa | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Tensile strength | 230.0 - 290.0 MPa | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.2100000000000002e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
20 °C | 2.2100000000000002e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.38e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.48e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.5699999999999998e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
100 °C | 2.38e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
200 °C | 2.48e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
300 °C | 2.5699999999999998e-05 1/K | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 605.0 - 650.0 °C | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
607.0 - 649.0 °C | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |||
Specific heat capacity | 900.0 J/(kg·K) | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Thermal conductivity | 130.0 - 150.0 W/(m·K) | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
138 W/(m·K) | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 19000000.0 - 21000000.0 S/m | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
20000000.0 S/m | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Electrical resistivity | 4.76e-08 - 5.26e-08 Ω·m | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
5e-08 Ω·m | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.15 - 0.35 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Copper | 0.1 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Iron | 0.40 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Magnesium | 2.2 - 2.8 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Manganese | 0.1 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Silicon | 0.25 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Zinc | 0.1 % | H244 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: good, Protective: very good | |
| Corrosion properties | Seawater: very good to good, weathering: good | |
| Workability | Bending / Spinning (cold): very good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (H12) | |
Metal
- EN 573-3 Grade 3.0515 H244 Aluminium – Full Technical Specs & Standards
- EN 573-3 AW-3103 H244: Key Properties and Standards
- EN 573-3 Grade 3.0255 H244 Aluminum Alloy – High-Quality, Precision-Built
- EN 573-3 Grade 3.3535 H244 – Premium Aluminum Alloy with Advanced R&D & High Mechanical Performance
- EN 573-3 Grade 3.3547 H244 – Aluminium Alloy Properties & Specifications
- EN 573-3 AW-5754 H244: Premium Aluminum Alloy for Industrial Applications
- EN 573-3 Grade 3.3523 H244 Aluminum Alloy – Corrosion‑Resistant & Easily Weldable
- EN AW-5052 H224: Marine-Grade Aluminum Alloy with Superior Corrosion Resistance and Weldability
- EN 573-3 Grade AW-5052 H114 Aluminum Alloy – Superior Corrosion Resistance & Welding Performance
- EN 573-3 AW-5052 F: Premium Aluminum Alloy for Superior Corrosion Resistance