EN 573-3 Grade AW-5052 H114 Aluminum Alloy – Superior Corrosion Resistance & Welding Performance
Aluminum EN AW-5052 is a non-heat treatable alloy with excellent finishing qualities. EN AW-5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the best welding characteristics of all aluminum alloys.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.68 g/cm³ | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Bending angle 90° | 1.0 °/t | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
1.75 °/t | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Elastic modulus | 70.0 GPa | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | |||
Shear modulus | 26.3 GPa | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Tensile strength | 165.0 - 240.0 MPa | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
170.0 - 240.0 MPa | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.2100000000000002e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
20 °C | 2.2100000000000002e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.38e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.48e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
20 °C | 2.5699999999999998e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
100 °C | 2.38e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
200 °C | 2.48e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
300 °C | 2.5699999999999998e-05 1/K | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 605.0 - 650.0 °C | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
607.0 - 649.0 °C | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |||
Specific heat capacity | 900.0 J/(kg·K) | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
Thermal conductivity | 130.0 - 150.0 W/(m·K) | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | ||
138 W/(m·K) | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 19000000.0 - 21000000.0 S/m | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
20000000.0 S/m | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar | |
Electrical resistivity | 4.76e-08 - 5.26e-08 Ω·m | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
5e-08 Ω·m | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.15 - 0.35 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Copper | 0.1 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Iron | 0.40 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Magnesium | 2.2 - 2.8 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Manganese | 0.1 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Silicon | 0.25 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Zinc | 0.1 % | H114 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Foil, Wire, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: good, Protective: very good | |
| Corrosion properties | Seawater: very good to good, weathering: good | |
| Workability | Bending / Spinning (cold): very good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (H12) | |
Metal
- EN 573-3 Grade 3.3547 H114 – Aluminium Alloy Properties & Standards
- EN 573-3 Grade 3.3535 H114: Premium Aluminum Alloy with Advanced Properties
- AW-5754 H114 Aluminium Alloy – EN 573-3 Certified Grade
- AW-5083 H114 Aluminum Alloy – EN 573-3 Grade Specification
- EN AW-5052 H47 Aluminum Alloy – Superior Corrosion Resistance & Weldability
- EN 573-3 Grade 3.3523 H114 Aluminum Alloy – Superior Corrosion Resistance & Welding
- EN 573-3 Grade 3.3545 H114: High-Strength, Corrosion-Resistant Aluminum Alloy
- EN AW-5052 H224: Marine-Grade Aluminum Alloy with Superior Corrosion Resistance and Weldability
- EN 573-3 Grade AW‑5052 H244 Aluminum – Superior Corrosion Resistance & Weldability
- EN 573-3 AW-5052 F: Premium Aluminum Alloy for Superior Corrosion Resistance