AW-5010 H26 – EN 573-3 Certified Aluminum‑Magnesium Alloy, High Hardness, Non‑Food Safe
Naturally hard AlMg alloy. The alloy is not food safe.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.71 g/cm³ | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
20.0 °C | 2.7 g/cm³ | H26 | EN 573-3 | Flat |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Bending angle 180° | 2.0 °/t | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
2.5 °/t | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Bending angle 90° | 1.0 °/t | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
1.5 °/t | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
2.0 °/t | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | |||
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Hardness, Brinell | 50.0 [-] | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 50.0 [-] | H26 | EN 573-3 | Flat | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 27.0 | H26 | EN 573-3 | Flat | |
Tensile strength | 20.0 °C | 155.0 - 195.0 MPa | H26 | EN 573-3 | Flat | Transverse |
20.0 °C | 155.0 - 195.0 MPa | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium | ||||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium | ||||
Thermal conductivity | 20.0 °C | 215.0 W/(m·K) | H26 | EN 573-3 | Flat |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 35000000.0 | H26 | EN 573-3 | Flat | |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.15 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.25 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.7 % | H26 | EN 573-3 | Flat |
0.70 % | H26 | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Magnesium | 0.2 - 0.6 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.1 - 0.3 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Silicon | 0.4 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Titanium | 0.1 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 0.3 % | H26 | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- AW-5010 F Aluminium Alloy – EN 573-3 Grade, Specifications & Properties
- AW-3105A H26 Aluminium Alloy – EN 573-3 Certified, Food‑Safe & Durable
- AW-5010 H46 Aluminum Alloy – EN 573-3 Grade, 5000 Series
- AW-5010 H48 – EN 573-3 Grade Aluminium Alloy (AlMg)
- AW-5010 H42 Aluminum Alloy – EN 573-3 Grade – High-Performance Structural Metal
- AW‑5010 H44 – EN 573‑3 Certified Aluminium Alloy for High‑Strength Applications
- EN 573-3 Grade AW‑5010 H45 – High‑Strength AlMg Alloy for Industrial Use
- AW-4115 H26 Aluminum Alloy – EN 573-3 Grade Specification
- AW‑5010 H19 Aluminium Alloy – EN 573‑3 Grade, High-Strength 5000 Series
- AW-5010O AlMg Alloy (EN 573-3) – 5% Magnesium, Non‑Food Safe, 5000 Series Properties