AW-5070 O Aluminum Alloy – EN 573-3 Certified, High Strength & Versatile
Naturally hard AlMg alloy. The alloy is not food safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.67 g/cm³ | O | EN 573-3, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Bending angle 180° | 1.0 °/t | O | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
Bending angle 90° | 1.0 °/t | O | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Elongation | 18.0 % | O | EN 573-3, EN 485 | Strip, Sheet, Plate | A100 | |
20.0 °C | 18.0 % | O | EN 573-3 | Flat | Transverse | |
20.0 °C | 18.0 % | O | EN 573-3 | Flat | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 20.0 °C | 270.0 - 350.0 MPa | O | EN 573-3 | Flat | Transverse |
20.0 °C | 270.0 - 350.0 MPa | O | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium |
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium |
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 112.0 - 205.0 W/(m·K) | Typical for Wrought 5000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 18000000.0 - 31000000.0 S/m | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Copper | 0.25 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Iron | 0.4 % | O | EN 573-3 | Flat |
0.40 % | O | EN 573-3, EN 485 | Strip, Sheet, Plate | |
Magnesium | 3.5 - 4.5 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Manganese | 0.4 - 0.8 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Silicon | 0.25 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Titanium | 0.15 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Zinc | 0.4 - 0.8 % | O | EN 573-3, EN 485 | Flat, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- AW-8014 O – Food-Safe, High-Performance Aluminum Alloy (EN 573-3)
- AW-8111 O Aluminium Alloy – EN 573‑3 Grade, Food Safe & High Strength
- EN 573-3 Grade AW-2091: Premium Age-Hardenable AlCu Alloy for Structural Applications
- AW-4006 F – Food‑Safe, Naturally Hardened AlSi Alloy (EN 573‑3)
- AW-5010 F Aluminium Alloy – EN 573-3 Grade, Specifications & Properties
- AW‑6065 T6 Aluminium Alloy – EN 573‑3 Certified
- EN 573-3 Grade AW-6064A T6 Aluminium Alloy – Technical Overview
- EN 573-3 Grade AW-3102 F Aluminium Alloy – Properties & Standards
- AW-6106 T6 Aluminium Alloy – EN 573-3 Certified, Food‑Safe, High‑Strength
- AW-5070 H111 Aluminum Alloy – EN 573-3 Certified Grade