Why Vickers PPOC‑Q Series Piston Pumps Deliver Superior Performance

Vickers PPOC-Q series piston pumps are lightweight, high-pressure, low-vibration high flow, compact and reliable. These pumps can be used in many different applications including hydraulic power steering (HPS), brake booster and clutch master cylinders. The PPOC-Q series is available in a variety of sizes and bore configurations to meet virtually any application requirement.

The advantages of Vickers PPOC-Q Series piston pumps include:

Vickers PPOC-Q Series piston pumps are designed for maximum efficiency and extended component life.

Vickers pumps are designed for maximum efficiency and extended component life. The PPOC-Q Series is a centrifugal pump manufactured for handling liquids of high viscosity, including crude oil, heating oils, and lubricating oils. The pump has a self-priming feature that allows it to start from dry suction and operate in water or other liquids without additional suction piping or equipment. This pump is also available with a special flushing port to allow automatic flushing of the suction line after shutdown.

The PPOC-Q Series features four sizes ranging from 2 hp (1.5 kW) to 12 hp (9 kW). The pumps are suitable for use in industrial applications requiring high-capacity pumping at moderate pressures and flow rates. They can operate continuously at temperatures up to 200°F (93°C) and with viscosities up to 100 cSt (@100°F [38°C]).

The advantages of Vickers PPOC-Q Series piston pumps

The output flow of Vickers PPOC-Q Series piston pumps is proportional to the drive speed and displacement.

Vickers PPOC-Q Series piston pumps are designed and manufactured by the Vickers Pumps Group, a worldwide leader in the manufacture of pump solutions and services.

Vickers PPOC-Q Series piston pumps are used for pumping liquids from small tanks or other containers, or for transferring liquids from one container to another.

The output flow of Vickers PPOC-Q Series piston pumps is proportional to the drive speed and displacement. They are available as single-acting or double-acting pistons.

The valve plate and valve housing are designed in a compact package that requires fewer moving parts and results in lower internal leakage.

The valve plate and valve housing are designed in a compact package that requires fewer moving parts and results in lower internal leakage. The PPOC-Q series consists of four models: the PPOC-Q15, PPOC-Q25, PPOC-Q40 and the PPOC-Q65. These pumps are available with either an integrated check valve or an external check valve. The external check valve is designed for use when there is a risk of leakage past the seal due to overpressure conditions caused by excessive suction lift or contamination entering the pump chamber. The external check valve can also be used to open in response to high suction lift in order to prevent excess suction pressure from damaging the pump.

Vickers PPOC-Q Series piston pumps feature an oversized inlet passage that improves volumetric efficiency, while the removable valve plate makes servicing easier.

The PPOC-Q Series is a compact, lightweight motorized pump for high pressure water applications. The rugged cast iron body and volute are designed to withstand harsh environments and resist corrosion from chemical exposure. A removable valve plate allows easy access to the internal workings of the pump for maintenance or repair.

Vickers’ new PPOC-Q series of motorized piston pumps features an oversized inlet passage for increased volumetric efficiency, while maintaining low pressure loss characteristics through long life seals and stainless steel shafts. The PPOC-Q is available in three different sizes: 4″, 6″ and 8″ bore diameters with maximum discharge pressures up to 4500 psi (310 bar).

The cartridge-style, fixed-displacement design of these pumps makes them easy to install and commission, with minimal downtime.

The Vickers PPOC-Q Series piston pumps are a family of cartridge-style, fixed-displacement pumps that are ideal for high pressure and high temperature applications. They feature a split case design, with a separate motor and pump housing. This makes them easy to install and commission, with minimal downtime.

The PPOC-Q Series piston pumps are designed for continuous operation at pressures up to 1,000 psi and temperatures up to 250°F (121°C). They feature an epoxy-coated cast iron construction for long life in corrosive environments. The pumps are available with flow rates from 0.03 gpm to 3 gpm (0.08 m3/h to 10 m3/h), making them suitable for use in a wide range of applications including chemical processing applications, water treatment systems and air compressors.

With a cast iron alignment base, the inlet and outlet ports can be positioned anywhere around the housing to make connections easier.

The Vickers PPOC-Q Series piston pump has been designed to meet the needs of the commercial and industrial water pumping industry. The pump is available with a variety of different discharge sizes, flow rates and pressure ratings.

With a cast iron alignment base, the inlet and outlet ports can be positioned anywhere around the housing to make connections easier. This also gives you more installation options when designing your system.

The PPOC-Q Series piston pump is available in either single phase or three phase models with AC or DC power motors. The AC motors feature an oil lubricated shaft with bearings that are sealed from the environment by an aluminium end plate. This design ensures long service life and low maintenance costs for your pumping application.

The shaft seal on all Vickers piston pumps has been designed to prevent leakage from occurring at this point in the system – even if it is damaged by corrosion or erosion of internal components over time or if there are abrasion issues caused by debris particles entering the system during operation (particularly common in open systems).

The advantages of Vickers PPOC-Q Series piston pumps

Vickers PPOC-Q Series pumps have many advantages that make them worth considering for your business needs.

The first advantage of these piston pumps is that they are made with a high quality of materials, which means that they will last for a very long time. This is especially true if you choose to purchase a model made with stainless steel or aluminum. These materials are more durable than plastic and other metals that are commonly used in other types of products. You won’t have to worry about replacing your piston pump on a regular basis, because it will last for years without any problems or issues.

Another benefit to these pumps is that they are very easy to install and use. They do not require any special training or experience to operate them properly, which makes them ideal for businesses that need simple solutions to their pumping needs. You won’t need an expert mechanic or engineer on staff just so you can keep your equipment working properly at all times! This allows you to save money on labor costs and other expenses related to maintaining your equipment properly over time.

The development of PPOC-Q series piston pump could be described as the fusion of design & innovation. With the frame made of alloy steel, it featured compact size (dia~130mm), light weight (about 2kg), high power density and good mechanical strength. Excellent anti-impact & anti-collision capabilities, these Vickers piston pumps are used in many kind of industries such as chemical, food industry as a certain degree of pollution environment. It’s well acknowledged that these Vickers piston pump is one of the most reliable vacuum pump and can bring you cost efficiency benefits.