The Samsung SL25ASY CNC turning center’s Y axis adds integrated machining, providing machining capability on the workpiece that is not parallel or perpendicular to the spindle center line.   The lathe uses a rigid, single-tube-type bed design (30-degree slant) to ensure minimum bending

  The first thing I noticed while perusing the Doosan International Machine Tool Fair (DIMF), machine tool builder Doosan’s in-house technology exhibition in Changwon, South Korea, was the sheer diversity of the company’s product line. Equipment ranged from conventional HMCs and VM

The Praktikant VC plus precision lathe for vocational training is equipped with the company’s e-Tim system for monitoring and regulating energy consumption. With this system, the drive management permanently feeds brake energy back into the power supply system. Auxiliary equipment not in use i

ZPS America’s six-spindle lathe features 51- to 67-mm bar capacity and is designed for continuous or series production of precision-turned parts. A solid base casting increases rigidity and stability.The machine includes six frontal slides with as many as 142 working strokes, six cross-slides,

Designed to rough and fine turn large workpieces, Chevalier’s FBL-530 lathe features a 45-degree slant-bed design made of Meehanite cast iron with a wide-span, ribbed-box structure. Four 130- × 80-mm box ways are designed to provide stability and support.The lathe is available in 80"

Mag’s VTC 2500H vertical turning center combines gear hobbing and milling capabilities with its range of turning, milling, drilling, threading and contouring functions for workpieces ranging to 2,700 mm in diameter.The multi-axis machine can turn blanks and subsequently cut gear teeth, all in

Haas’ DS-30 dual-spindle turning centers are designed to turn both ends of a part in a single setup to minimize part handling, increase throughput and reduce work-in-process. The opposed spindles feature fully synchronized turning for clean part-off and enable on-the-fly part pass-off to reduc

The TRAK TRL 1630SX lathe and the TRAK DPM SX3P bed mill both feature the ProtoTRAK CNC. The 1630SX may be operated manually or by CNC with the optional TRAKing feature. The bedways are hardened and ground, and sliding surfaces are Turcite coated. The 1630SX is equipped with electronic handwheels an

The EvoDeco single-spindle turning machine offers fully synchronous drives with acceleration/deceleration to reduce cycle times for parts that require a lot of stopping. The machine can be used with or without a guide bush.   The company also offers Almac milling machines and Esco by Tornos c

The UltraTurn XL CNC single-spindle screw machine features a new subspindle and is powered by a 2.5-hp servomotor with infinitely variable speeds ranging to 5,000 rpm. The subspindle is capable of both ID and OD work and can chuck parts externally or internally.

 Designed for high-volume production of small parts, the Hyper Quadrex 200MSY includes twin opposed turning spindles that deliver 30 hp and 5,000 rpm each. The machine features full C-axis CNC control for part positioning and contouring at a resolution of 0.0001 degree. It carries upper and low

The company will display four Swiss-type lathes and three turning centers. The latest iteration of the Cincom L-series, the L20X, incorporates a Y2 axis on the subspindle side, which enables a variety of extra tooling on both the front and back side of the part. It also enables more overlapping of m

The SPRINT 20 linear production lathe combines driven tools and a main-spindle Y axis with an accommodating, functional work area to simultaneously machine with two tools, the manufacturer says. The machine is suitable for turning bars ranging to 20 mm in diameter for automotive, electronic, medical

The ST-10Y from Haas is a small-footprint, Y-axis turning center that provides 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling and tapping, and it is equipped with high-torque live tooling and a servo-driven C axis for versatile four-axis capability.

Yama Seiki’s Goodway GLS-1500 series high-speed CNC turning center features a 30-degree slant-bed casting design. An optional single-moving, live-tool turret makes the turning center well-suited for demanding turning operations, the company says.The slant-bed is designed for smooth chip dispos

Ganesh Machinery’s Cyclone 32-GT three-axis, 32-mm (1¼") bar diameter CNC lathe features a heavily ribbed cast iron construction designed to damp cutting vibration for improved productivity, surface finish and tool life. The lathe includes toolholders to mount eight tools, a parts

South Bend offers the 16" × 60" EVS toolroom lathe. Features include the 3 V-way bed, which is constructed of precision-ground Meehanite cast iron; Allen Bradley electrical controls; a Japanese-made Yaskawa inverter; Japanese spindle bearings; and a tailstock barrel that moves 6"

Chevalier’s vertical turning centers combine hard turning, milling, drilling, tapping and grinding capabilities in a single setup. A programmable ±100-mm Y axis enables them to perform multitasking operations, which reduce cycle times and accuracy discrepancies that can occur when a par

  During the past 30 years, George Ziaja has become well-known in the Milwaukee area for his ability to solve tough process improvement problems. That personal reputation has also become a hallmark of his shop, Ziaja Machining Corporation (ZMC). The shop touts a track record of not only produc

 The X-class machines from DMG/Mori Seiki build on the performance of the company’s N series. These competitively priced machines offer enhanced quality and energy efficiency while providing measures against thermal displacement for cutting accuracy, the company says.   The machine