Ferro-Titanit® Cromoni – High-Strength, Non-Magnetic Titanium Alloy
Supplied in solution-annealed condition. Ferro-Titanit® Cromoni is non-magnetisable, even after ageing at temperatures up to 900 °C.
Properties
General
| Property | Value |
|---|---|
Density | 7.4 g/cm³ |
Grain structure | Titanium carbide + austenite |
Mechanical
| Property | Value |
|---|---|
Compressive strength | 1500 MPa |
Elastic modulus | 277 GPa |
Flexural strength | 1300 MPa |
Hardness, Rockwell C | 54 [-] |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 100 °C | 9e-06 1/K | for 20°C to the mentioned temperature |
200 °C | 1e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.05e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.08e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.11e-05 1/K | for 20°C to the mentioned temperature | |
600 °C | 1.15e-05 1/K | for 20°C to the mentioned temperature | |
Thermal conductivity | 12.4 W/(m·K) |
Electrical
| Property | Value |
|---|---|
Electrical resistivity | 1.53e-06 Ω·m |
Magnetic
| Property | Value | Comment |
|---|---|---|
Relative magnetic permeability | 1 [-] | max. |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Chromium | 20 % | ||
Molybdenum | 15.5 % | ||
Nickel | Balance | ||
Other | 22 % | TiC | |
Technological properties
| Property | ||
|---|---|---|
| Application areas | This austenitic grade is used for applications requiring complete non-magnetisability, a high wear resistance and maximum corrosion resistance. | |
| Corrosion properties | Besides having a high wear resistance, this alloy is extremely resistant to corrosion and scaling, as well as highly tempering-resistant. This corrosion resistance is at its best with finely ground or polished surfaces. | |
| General machinability | In as-delivered condition, this material can be machined by conventional methods. | |
| Heat Treatment | Solution Anealing: 1200°C, 2 hr in vacuum (Cooling 4 bar N2) Hardness: 52 HRC - Age-Hardening 800°C, 6 hr in Vacuum, Hardness: 54 HRC | |
Composite material
- Alumina-Zirconia 40% Abrasive – Superior Hardness & Precision
- Ferro‑Titanit® U – Ultra‑Hard Titanium Carbide Steel for Superior Wear Resistance
- AgCu20 Alloy: Comprehensive Mechanical & Thermal Properties at 23°C
- PtNi10 Alloy: Comprehensive Mechanical & Thermal Properties
- PtIr10 Platinum-Iridium Alloy: High-Strength, High-Temperature Material
- Corroplast Plate – High-Performance, Corrosion-Resistant Steel for Precision Machining
- Nitrodur 8524 QT - High-Performance Quenched & Tempered Steel for Hydraulic Applications
- Premium Molybdenum Plate – Heat‑Resistant & Durable
- Durapur 1219 QT Bearing Steel – High Performance for Low-Burden Rolling Applications
- Firmodur 1249 QT Steel – High-Performance Quenched & Tempered Grade for Automotive & Industrial Applications