Ferro‑Titanit® U – Ultra‑Hard Titanium Carbide Steel for Superior Wear Resistance
The binder phase of Ferro-Titanit® U is roughly equivalent to the austenitic CrNiMo steel X 10CrNiMoNb 18 10 (Mat. No. 1.4580). Its high titanium carbide content of 34 % by weight, or 45 % by volume, provides it with outstanding wear resistance. The Cr and Ni contents simultaneously give the material good scaling resistance and high-temperature strength.
Properties
General
| Property | Value |
|---|---|
Density | 6.6 g/cm³ |
Grain structure | Titanium carbide + austenite |
Mechanical
| Property | Value |
|---|---|
Compressive strength | 2200 MPa |
Flexural strength | 950 MPa |
Hardness, Rockwell C | 51 [-] |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 800 °C | 1.25e-05 1/K | for 20°C to the mentioned temperature |
Thermal conductivity | 18 W/(m·K) |
Electrical
| Property | Value |
|---|---|
Electrical resistivity | 9.6e-07 Ω·m |
Magnetic
| Property | Value | Comment |
|---|---|---|
Relative magnetic permeability | 1 [-] | max. |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Chromium | 18 % | ||
Iron | Balance | ||
Molybdenum | 2 % | ||
Nickel | 12 % | ||
Other | 34 % | TiC | |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Ferro-Titanit ® U is used where non-magnetisable material with a high wear resistance is required. Its excellent corrosion resistance, in particular in media containing chlorine ions, gives it a broad range of applications in the chemical industry. | |
| Corrosion properties | The material is non-magnetisable and, because of its high Cr and Mo contents, possesses excellent resistance to pitting corrosion in media containing chlorine ions. | |
| General machinability | In as-delivered condition, this material can be machined by conventional methods. | |
Composite material
- WC-Ag Composite: High-Performance Electrical Contact Material
- RM329 Melamine‑Coated Rods – High Strength & Durability
- NP515LS Phenolic Sheet – High‑Temperature Glass Fabric for Reliable Insulation
- High-Performance Epoxy RT130M Tube – Flame Resistant & UL94 V-0 Certified
- Ferro‑Titanit® C‑Spezial: Ultra‑High Wear‑Resistant Titanium Carbide Steel
- Ferro‑Titanit® WFN: High-Temperature Strength & Corrosion Resistance
- MC507U Silicone Sheet – High‑Strength, Utility‑Grade Material for Industrial Applications
- Ferro-Titanit® Cromoni – High-Strength, Non-Magnetic Titanium Alloy
- Ferro-Titanit® S: High-Performance Titanium Carbide Steel Alloy
- AA 201.0 T4 Alloy – Key Mechanical & Thermal Properties