BP11HPN Phenolic Sheet – Superior Impact Strength & Mechanical Performance
Canvas machining grade for structural and mechanical applications. BP11HPN has better impact strength than phenolic paper grades.
Properties
General
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Bonding strength | 1088.6 Kg | ASTM D229 | Condition A |
Density | 1.37 g/cm³ | ASTM D792 | |
Moisture absorption | 0.8 - 3.4 % | ASTM D570 | Condition A | Depending on the thickness of the specimen |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Compressive strength | 241.3 MPa | ASTM D695 | Condition A | Flatwise |
Flexural modulus | 16.5 GPa | ASTM D790 | Condition A, Transverse |
17.2 GPa | ASTM D790 | Condition A | |
Flexural strength | 124.1 MPa | ASTM D790 | Condition A |
124.1 MPa | ASTM D790 | Condition A, Transverse | |
Hardness, Rockwell M | 100 [-] | ASTM D785 | |
Impact strength, Izod unnotched, ASTM | 108 J/m | ASTM D256 | Condition E-48/50, Transverse |
125 J/m | ASTM D256 | Condition E-48/50 |
Thermal
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, electrical | 125 °C | UL Bulletin 746b¹ | |
Relative temperature index, mechanical strength | 125 °C | UL Bulletin 746b¹ | |
Flammability | UL Bulletin 94, Class HB, Condition A | ||
Electrical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Breakdown voltage | 55 kV | ASTM D149 | Condition A |
Dielectric strength | 20.75 kV/mm | ASTM D149 | Condition A |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Structural and mechanical applications | |
| Fillers | Cotton Fabric | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |
Composite material
- MC514MG Phenolic Sheet – High‑Conductivity Laminated Glass for Power Generation
- BP11MPN Phenolic Composite Sheet – Superior Medium‑Weave Cotton Performance
- NP515LS Phenolic Sheet – High‑Temperature Glass Fabric for Reliable Insulation
- NP322 Phenolic Sheet – Superior Lubricity & Machining Performance
- BP21NPM Phenolic Resin Sheet – Superior Lubricity & Machining Performance
- Phenolic NP639 Sheet – 150°C Rated, Low-Moisture, High-Strength Laminate
- Phenolic NP310HT Sheet – High-Impact Strength & Military-Grade Performance
- Phenolic NP610 Sheet – High-Strength, Machining‑Ready Material
- BP11NPN Phenolic Sheet – High-Performance Impact Strength for Structural Applications
- Phenolic NP101 Sheet – High-Impact, Low Moisture, Superior Electrical Properties