JIS H4001 Grade 3004 Aluminium – ½ Hard Condition for Optimal Performance
Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 2.72 - 2.73 g/cm³ | Typical for Wrought 3000 Series Aluminium |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Elastic modulus | 69.5 - 70.0 GPa | Typical for Wrought 3000 Series Aluminium | ||
Elongation | 3.0 % | stabilized at 1/2 hard | JIS H4001 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] | Typical for Wrought 3000 Series Aluminium | ||
Shear modulus | 25.0 - 26.0 GPa | Typical for Wrought 3000 Series Aluminium | ||
Tensile strength | 226.0 MPa | stabilized at 1/2 hard | JIS H4001 | |
Yield strength | 177.0 MPa | stabilized at 1/2 hard | JIS H4001 |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.4e-05 1/K | Typical for Wrought 3000 Series Aluminium |
Melting point | 629.0 - 654.0 °C | Typical for Wrought 3000 Series Aluminium |
Specific heat capacity | 893.0 - 920.0 J/(kg·K) | Typical for Wrought 3000 Series Aluminium |
Thermal conductivity | 154.0 - 193.0 W/(m·K) | Typical for Wrought 3000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 23000000.0 - 29000000.0 S/m | Typical for Wrought 3000 Series Aluminium |
Electrical resistivity | 3.4e-08 - 4.2e-08 Ω·m | Typical for Wrought 3000 Series Aluminium |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- JIS H4001 Grade 3004 Aluminum: ¼‑Hard Stabilized for Superior Performance
- JIS H4001 Grade 3004 Aluminium – 3/4 Hard Stabilized, Optimal Strength & Durability
- DIN 17741 NiMn1 1/2 Hard – Premium Nickel-Manganese Alloy
- JIS H4000 Grade 5083 Aluminium – 1/4 Hard Stabilized, Mechanical Properties & Standards
- DIN 17740 Ni99.6 1/2 Hard – Premium Corrosion-Resistant Nickel Alloy
- JIS G3141 Grade SPCC 1/4 Hard Steel – Key Properties & Specifications
- JIS G3141 SPCC 1/8 Hard Low-Carbon Steel – Properties & Specifications
- JIS G3141 SPCD 1/2 Hard Steel: Detailed Material Properties
- JIS G3141 Grade SPCE 1/2 Hard – Technical Specifications
- JIS G3141 Grade SPCC 1/2 Hard - Premium Low‑Carbon Steel for Structural Use