High-Frequency Grade Electrical Steel – 0.20 mm Thin Gauge (EN 10303:2015 Compliant)
This non-oriented fully processed high frequency grade has guaranteed magnetic properties in accordance with EN 10303:2015, which specifically concerns thin electrical steels for use at frequencies above 100 Hz. Full magnetic characterisation curves at various frequencies are available on request.
High frequency electrical steels have very low loss levels, especially at high frequencies. These properties are a result of the thin gauge of this material (0.20 mm), its particular chemical composition and specific thermomechanical processing.
Properties
General
| Property | Value |
|---|---|
Density | 7.6 g/cm³ |
Mechanical
| Property | Value | Comment |
|---|---|---|
Elongation | 12 - 22 % | A80 |
Hardness, Vickers | 205 - 235 [-] | |
Number of bends | 2 [-] | min. Guaranteed |
Tensile strength | 505 - 545 MPa | |
Yield strength | 395 - 435 MPa | |
Yield to strength ratio | 0.78 - 0.83 [-] |
Magnetic
| Property | Value | Frequency | Comment |
|---|---|---|---|
Guaranteed core loss | 15 W/kg | 400Hz | max. at 1 T |
Guaranteed polarization | 1.48 [-] | min. | at 2500 A/m | |
1.59 [-] | min. | at 5000 A/m | ||
1.69 [-] | min. | at 10000 A/m | ||
Stacking factor | 0.93 mm | min. | Guaranteed | |
Typical core loss | 32 W/kg | 700Hz | at 1 T |
38 W/kg | 400Hz | max. at 1.5 T |
Technological properties
| Property | ||
|---|---|---|
| Application areas | This grade is designed for high speed rotating machines (100 to 5000 Hz). It allows minimisation of losses due to higher harmonics and clearly increases machine efficiency in the case of non-sinusoidal power supply. This thin, fully processed grade is also used when weight and volume reduction are of major importance, such as in medical or aviation applications. | |
| Coating | This high frequency grade is available non-insulated or varnished with a C5-type coating. | |
| Other | The above properties are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties. | |
Metal
- Top 6 Applications of Beryllium in Modern Technology
- Understanding the High Cost of Titanium: Supply, Demand & Production Challenges
- PTFE: Exceptional Corrosion Resistance and Industrial Applications
- Tungsten: Key Properties and Industrial Applications
- UGICHROM® 4404: Ultra‑Durable Chromium‑Plated Stainless Steel for High‑Performance Hydraulics
- UGICHROM® 4307 – Premium Micro‑Fissured Chromium Plating for High‑Performance Hydraulic & Pneumatic Systems
- UGICHROM® 4305 – Advanced Micro‑Fissuring Chromium Plating for Hydraulics & Pneumatics
- UGICHROM® 4057 – Advanced Micro‑Fissured Chromium Plating for Superior Hydraulic & Pneumatic Performance
- UGI® HT605 – High‑Temperature Cobalt‑Chromium‑Nickel‑Tungsten Alloy with Superior Oxidation Resistance
- Premium 99.8%+ Pure Chromium (HP Cr) – Superior Quality