home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

EN 12166 Grade CuZn37 H04 – Premium Copper Alloy for Cold Forming & Corrosion Resistance

CuZn37 (CW508L) is an unhardenable wrought alloy. High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for CuZn36. CuZn37 is the main alloy for cold forming. It shows favorable corrosion resistance to fresh water. Processing properties: warm forming: good cold forming: very good machinability: moderately hard soldering: good soft soldering: very good TIG-welding: moderately burnishing: very good CuZn37 is used for bulb bases, wire clamps for aerial lines, contact springs, metal and wooden screws, print roller and zip fastener. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8.44 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

110 GPa

100.0 °C

106 GPa

200.0 °C

102 GPa

300.0 °C

97 GPa

400.0 °C

89 GPa

500.0 °C

79 GPa

Hardness, Vickers

20.0 °C

155 - 190 [-]

Shear modulus

23.0 °C

40 GPa

Typical for Wrought Copper Brass

Tensile strength

20.0 °C

550 - 750 MPa

Yield strength Rp0.2

20.0 °C

550 - 610 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

150.0 °C

1.9E-5 1/K

300.0 °C

2.1E-5 1/K

650.0 °C

2.3E-5 1/K

800.0 °C

2.4E-5 1/K

Melting point

875 - 1075 °C

Typical for Wrought Copper Brass

Specific heat capacity

20.0 °C

377 J/(kg·K)

Thermal conductivity

-200.0 °C

50 W/(m·K)

20.0 °C

120 W/(m·K)

200.0 °C

142 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical conductivity

20.0 °C

1.50E+7 S/m

200.0 °C

1.20E+7 S/m

Electrical resistivity

20.0 °C

6.6E-8 Ω·m

200.0 °C

8.3E-8 Ω·m

Chemical properties

PropertyValue

Aluminium

0.05 %

Copper

62 - 64 %

Iron

0.1 %

Lead

0.1 %

Nickel

0.3 %

Tin

0.1 %


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 12166 CuNi10Zn42Pb2 H04 – High-Performance Wrought Copper Alloy
    2. EN 12166 Grade CuNi18Zn19Pb1 H04: High-Strength, Corrosion-Resistant Copper‑Nickel‑Zinc Alloy
    3. EN 12166: CuZn37 R700 Copper Alloy Wire – Specifications & Properties
    4. EN 12166 CuSn5 H04 – Premium Copper‑Tin Alloy for Precision Tubes and Connectors
    5. EN 12166 CuZn37 (CW508L) – High-Strength, Corrosion-Resistant Copper Alloy for Cold Forming
    6. EN 12166: CuZn37 (H08) – High‑Performance Copper Alloy for Cold Forming and Corrosion Resistance
    7. EN 12166 CuZn36 H04 – Unhardenable Wrought Alloy for Precision Deep‑Drawing and Pressure Components
    8. EN 12166 CuSn6 H04 – Premium Copper‑Tin Alloy for High Corrosion Resistance and Superior Mechanical Performance
    9. EN 12166 Copper Alloy CuZn37 (R290) – Properties & Specifications
    10. EN 12166 Grade CuZn37 R460 – High-Performance Copper Alloy Wire