EN 10277-2 Grade ZSt50-2: Cold‑Drawn or Turned, Soft‑Annealed Steel for High‑Performance Wear Parts
ZSt 50-2 is a bright drawn steel grade for wear and strength loaded parts (bolts, shafts, spindles).
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 - 7.9 g/cm³ | Typical for Medium Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 200 - 215 GPa | Typical for Medium Carbon Steel |
Elongation | 20.0 °C | 18 - 20 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for Medium Carbon Steel |
Shear modulus | 23.0 °C | 75 - 80 GPa | Typical for Carbon Steel |
Tensile strength | 20.0 °C | 580 - 600 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.32E-5 1/K | Typical for Medium Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel | |
Melting point | 1380 - 1514 °C | Typical for Medium Carbon Steel | |
Specific heat capacity | 23.0 °C | 470 - 520 J/(kg·K) | Typical for Medium Carbon Steel |
Thermal conductivity | 23.0 °C | 21 - 52 W/(m·K) | Typical for Medium Carbon Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.3 % |
Phosphorus | 0.05 % |
Sulfur | 0.05 % |
Metal
- EN 10277-2 Grade ZSt60-2: Cold‑Drawn, Soft‑Annealed Steel for High‑Strength, Wear‑Resistant Parts
- EN 10277-2 Grade ZSt70-2 – Cold Drawn/Turned, Soft‑Annealed High‑Carbon Steel
- EN 10277-2: Grade St 37-2 – Cold Drawn or Turned, Soft Annealed Steel
- EN 10277-2 Grade St 50-2: Cold-Drawn, Turned, Soft-Annealed Structural Steel for High-Strength Applications
- EN 10277-2 Grade St 60-2 – Cold Drawn, Turned & Soft Annealed Structural Steel
- EN 10277‑2 Grade St 70‑2: Cold‑Drawn, Turned, and Soft‑Annealed Structural Steel
- EN 10277‑2 Grade ZSt52‑3: High‑Strength, Cold‑Drawn Structural Steel for Dynamic Welded Applications
- EN 10277‑2 Grade St 44‑2: Cold‑Drawn, Turned & Soft‑Annealed Steel for Low‑Temperature Welded Construction
- EN 10277-2 Grade St 44-3: Cold‑Drawn, Turned & Soft‑Annealed Fine‑Grained Steel
- EN 10277-2 Grade St52‑3: Cold‑Drawn or Turned & Soft‑Annealed High‑Strength Steel