EN 10277-2 Grade ZSt60-2: High-Performance Turned Steel for Wear-Resistant Applications
ZSt 60-2 is a bright drawn steel grade for wear and strength loaded parts (bolts, shafts, spindles).
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 - 7.9 g/cm³ | Typical for Medium Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 200 - 215 GPa | Typical for Medium Carbon Steel |
Elongation | 20.0 °C | 12 - 14 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for Medium Carbon Steel |
Shear modulus | 23.0 °C | 75 - 80 GPa | Typical for Carbon Steel |
Tensile strength | 20.0 °C | 570 - 710 MPa | |
Yield strength | 20.0 °C | 305 - 325 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.32E-5 1/K | Typical for Medium Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel | |
Melting point | 1380 - 1514 °C | Typical for Medium Carbon Steel | |
Specific heat capacity | 23.0 °C | 470 - 520 J/(kg·K) | Typical for Medium Carbon Steel |
Thermal conductivity | 23.0 °C | 21 - 52 W/(m·K) | Typical for Medium Carbon Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.4 % |
Phosphorus | 0.05 % |
Sulfur | 0.05 % |
Metal
- EN 10277-2 Grade ZSt50-2 Turned – Durable, High-Performance Steel for Bolts & Shafts
- EN 10277-2: ZSt70-2 Steel – High-Strength, Wear-Resistant Turned Components
- EN 10277-2 Grade St 50-2 – Premium High-Strength, Wear-Resistant Steel
- EN 10277-2 Grade St 60-2 – Premium Structural Steel for Heavy‑Duty Applications
- EN 10277-2 Grade St 70-2 Structural Steel – High Wear Resistance & Strength
- EN 10277-2 Grade St 37-2: Turned Low‑Carbon Steel for Moderate Load Parts
- EN 10277-2 ZSt52-3 Structural Steel: High Strength, Fine-Grained, Ideal for Dynamic Loadings
- EN 10277-2 Grade St 44-3 Steel – Fine‑Grained, Low‑Carbon Construction Steel
- EN 10277-2 Grade St52-3 Turned Steel – High‑Strength, Fine‑Grained for Dynamic Load Applications
- EN 10277-2 Grade St 37-3 – Premium Fine‑Grained Structural Steel