home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

EN 1652 Grade CuNi10Fe1Mn R300 – High-Performance Copper Alloy for Corrosion Resistance

CuNi10Fe1Mn (CW352H) is comparable to CuNi10Fe1Mn, mat. no. 2.0872, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi10Fe1Mn is resistant to seawater, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: very good machinability: unfavorable hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, seawater desalination plants, chemical and sugar factories.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8.9 g/cm³

Mechanical

PropertyTemperatureValue

Elastic modulus

-253.0 °C

153 GPa

-195.0 °C

148 GPa

-100.0 °C

142 GPa

20.0 °C

130 GPa

50.0 °C

129 GPa

100.0 °C

128 GPa

150.0 °C

127 GPa

200.0 °C

125 GPa

250.0 °C

122 GPa

300.0 °C

121 GPa

Elongation

20.0 °C

25 - 30 %

Elongation A50

20.0 °C

20 %

Elongation, transverse

20.0 °C

30 %

Hardness, Vickers

20.0 °C

90 [-]

Tensile strength

20.0 °C

300 MPa

Tensile strength, transverse

20.0 °C

300 MPa

Yield strength Rp0.2

20.0 °C

100 - 120 MPa

Yield strength Rp0.2, transverse

20.0 °C

120 MPa

Yield strength Rp1.0

50.0 °C

145 MPa

100.0 °C

138 MPa

150.0 °C

133 MPa

200.0 °C

128 MPa

250.0 °C

123 MPa

300.0 °C

118 MPa

Yield strength Rp1.0, transverse

20.0 °C

145 MPa

50.0 °C

145 MPa

100.0 °C

138 MPa

150.0 °C

123 - 133 MPa

200.0 °C

118 - 128 MPa

250.0 °C

123 MPa

300.0 °C

118 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.4E-5 - 1.8E-5 1/K

Typical for Wrought Copper Nickel Grade

Melting point

915 - 1240 °C

Typical for Wrought Copper Nickel Grade

Specific heat capacity

20.0 °C

380 J/(kg·K)

Thermal conductivity

20.0 °C

50.2 W/(m·K)

Chemical properties

PropertyValue

Carbon

0.05 %

Cobalt

0.1 %

Iron

1 - 2 %

Lead

0.02 %

Manganese

0.5 - 1 %

Nickel

9 - 11 %

Phosphorus

0.02 %

Sulfur

0.05 %

Tin

0.03 %

Zinc

0.5 %


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 1652 CuCo1Ni1Be TH – High-Performance Copper Alloy for Industrial Applications
    2. EN 1652 Grade CuNi10Fe1Mn – Premium Copper‑Nickel Alloy R320
    3. EN 1652 Grade CuSn6 M – Premium Tin-Copper Alloy for Superior Corrosion Resistance
    4. EN 1652 Grade CuNi2Si M – High-Performance Copper Alloy for Superior Conductivity and Corrosion Resistance
    5. EN 1652 Grade CuZn37 R300 – Premium Copper Alloy for Cold Forming and Corrosion Resistance
    6. EN 1652 Grade CuZn36 R300 – Unhardenable Wrought Alloy with Superior Formability
    7. EN 1652 Grade CuNi2Be TH – High-Strength Low-Alloy Copper Alloy
    8. EN 1652 CuNi2Si TH: High-Performance Low-Alloy Copper Alloy
    9. EN 1652 Grade CuBe2 TH: High-Performance Hardenable Copper Alloy
    10. EN 1652 Grade CuCo2Be TH: High-Performance Low-Alloy Copper Alloy with Superior Conductivity