EN 1652 Grade CuNi2Be TH – High-Strength Low-Alloy Copper Alloy
CuNi2Be, mat. No CW110C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuNi2Be, mat. No 2.0850, acc. to DIN 17666 : 1983-12 applies: The alloy shows high tensile strength and high temperature resistance and mean electrical and favorable thermal conductivity. Processing properties: hot and cold forming: good machinability: moderately hard and soft soldering: good gas shielded welding: good burnishing: good Application: For resistance welding electrodes as well as for springs. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 8.8 g/cm³ |
Mechanical
| Property | Temperature | Value |
|---|---|---|
Elastic modulus | 20.0 °C | 140 GPa |
Elongation | 20.0 °C | 2 - 10 % |
Elongation A10 | 20.0 °C | 4 - 6 % |
Elongation A100 | 20.0 °C | 3 - 5 % |
Elongation A50 | 20.0 °C | 5 - 8 % |
Hardness, Brinell | 20.0 °C | 100 - 240 [-] |
Hardness, Vickers | 20.0 °C | 105 - 290 [-] |
Tensile strength | 20.0 °C | 400 - 1040 MPa |
Yield strength Rp0.2 | 20.0 °C | 330 - 970 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.6E-5 - 1.8E-5 1/K | Typical for Wrought Copper High Copper Alloy |
Melting point | 855 - 1090 °C | Typical for Wrought Copper High Copper Alloy | |
Specific heat capacity | 23.0 °C | 360 - 420 J/(kg·K) | Typical for Wrought Copper High Copper Alloy |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 20.0 °C | 2.80E+7 S/m |
Specific Electrical conductivity | 48 % IACS |
Chemical properties
| Property | Value |
|---|---|
Beryllium | 0.2 - 0.6 % |
Cobalt | 0.3 % |
Iron | 0.2 % |
Nickel | 1.4 - 2.4 % |
Metal
- EN 1652 CuCo1Ni1Be TH – High-Performance Copper Alloy for Industrial Applications
- EN 1652 Grade CuNi10Fe1Mn – Premium Copper‑Nickel Alloy R320
- EN 1652 CuNi30Mn1Fe R410 – Premium Copper-Nickel-Manganese Alloy
- EN 1652 Grade CuZn38Pb2 H110 – Premium Wrought Copper Brass
- EN 1652 Copper Brass CuZn38Pb2 R340 – Specifications & Performance
- EN 1652 Grade CuSn6 M – Premium Tin-Copper Alloy for Superior Corrosion Resistance
- EN 1652 Grade CuNi2Si M – High-Performance Copper Alloy for Superior Conductivity and Corrosion Resistance
- EN 1652 CuNi2Si TH: High-Performance Low-Alloy Copper Alloy
- EN 1652 Grade CuBe2 TH: High-Performance Hardenable Copper Alloy
- EN 1652 Grade CuCo2Be TH: High-Performance Low-Alloy Copper Alloy with Superior Conductivity