EN 1652 CuZn5 H110 – Premium Copper Alloy for Electrical & Shock-Absorbing Applications

CuNi10Fe1Mn (CW352H) is comparable to CuNi10Fe1Mn, mat. no. 2.0872, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by

CuNi30Mn1Fe (CW354H) is comparable to CuNi30Mn1Fe, mat. no. 2.0882, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by

PropertiesGeneralPropertyTemperatureValueDensity20.0 °C8.4 - 8.44 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C102 GPaElongation20.0 °C43 %Elongation A5020.0 °C33 %Poisson's ratio20.0 °C0.34 [-]Shear modulus23.0 °C40 GPaTypical for Wrought Copper BrassTensile strength20.0

Cuco2Be, mat. No CW104C, is counted among hardenable, low alloyed copper alloys. To the comparable make Cuco2Be, mat. No 2.1285, acc. to DIN 17666 : 1983-12 applies: CuCo2Be achieves compared to CuBe2 at slightly lower hardness and strength values higher electrical and thermal conductivity. The temp