DIN 17460 X3CrNiN18-11 Solution-Annealed Steel (+AT) – High-Temperature Grade for Pressure Vessels
High temperature steel for pressure vessel and steam boiler engineering.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.93 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | -100.0 °C | 206 GPa | |
20.0 °C | 196 - 198 GPa | ||
100.0 °C | 190 - 192 GPa | ||
200.0 °C | 182 - 183 GPa | ||
300.0 °C | 174 - 175 GPa | ||
400.0 °C | 166 - 167 GPa | ||
500.0 °C | 158 - 159 GPa | ||
600.0 °C | 150 GPa | ||
700.0 °C | 142 GPa | ||
800.0 °C | 134 GPa | ||
900.0 °C | 127 GPa | ||
1000.0 °C | 120 GPa | ||
Elongation | 20.0 °C | 30 - 35 % | |
Poisson's ratio | 23.0 °C | 0.3 [-] | Typical for Austenitic Stainless Steel |
Shear modulus | 23.0 °C | 77 GPa | Typical for Austenitic Stainless Steel |
Tensile strength | 20.0 °C | 500 - 700 MPa | |
Yield strength Rp0.2 | 20.0 °C | 240 MPa | |
100.0 °C | 185 MPa | ||
200.0 °C | 150 MPa | ||
300.0 °C | 130 MPa | ||
400.0 °C | 120 MPa | ||
500.0 °C | 110 MPa | ||
550.0 °C | 105 MPa | ||
600.0 °C | 100 MPa | ||
Yield strength Rp1.0 | 20.0 °C | 275 MPa | |
100.0 °C | 220 MPa | ||
200.0 °C | 175 MPa | ||
300.0 °C | 150 MPa | ||
400.0 °C | 140 MPa | ||
500.0 °C | 130 MPa | ||
550.0 °C | 125 MPa | ||
600.0 °C | 120 MPa | ||
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | -100.0 °C | 1.49E-5 1/K | |
20.0 °C | 1.61E-5 1/K | ||
100.0 °C | 1.63E-5 - 1.67E-5 1/K | ||
200.0 °C | 1.69E-5 - 1.72E-5 1/K | ||
300.0 °C | 1.73E-5 - 1.77E-5 1/K | ||
400.0 °C | 1.78E-5 - 1.81E-5 1/K | ||
500.0 °C | 1.82E-5 - 1.84E-5 1/K | ||
600.0 °C | 1.85E-5 - 1.88E-5 1/K | ||
700.0 °C | 1.87E-5 - 1.91E-5 1/K | ||
800.0 °C | 1.94E-5 1/K | ||
900.0 °C | 1.97E-5 1/K | ||
1000.0 °C | 2E-5 1/K | ||
Max service temperature, long | 0 - 750 °C | ||
Melting point | 1230 - 1480 °C | Typical for Austenitic Stainless Steel | |
Specific heat capacity | -100.0 °C | 440 J/(kg·K) | |
20.0 °C | 450 - 472 J/(kg·K) | ||
100.0 °C | 487 J/(kg·K) | ||
200.0 °C | 503 J/(kg·K) | ||
300.0 °C | 512 J/(kg·K) | ||
400.0 °C | 520 J/(kg·K) | ||
500.0 °C | 530 J/(kg·K) | ||
600.0 °C | 541 J/(kg·K) | ||
700.0 °C | 551 J/(kg·K) | ||
800.0 °C | 559 J/(kg·K) | ||
900.0 °C | 565 J/(kg·K) | ||
1000.0 °C | 571 J/(kg·K) | ||
Thermal conductivity | 20.0 °C | 14.3 - 17 W/(m·K) | |
100.0 °C | 15.8 W/(m·K) | ||
200.0 °C | 17.5 W/(m·K) | ||
300.0 °C | 19 W/(m·K) | ||
400.0 °C | 20.5 W/(m·K) | ||
500.0 °C | 21.9 W/(m·K) | ||
600.0 °C | 23.3 W/(m·K) | ||
700.0 °C | 24.6 W/(m·K) | ||
800.0 °C | 26 W/(m·K) | ||
900.0 °C | 27.4 W/(m·K) | ||
1000.0 °C | 28.8 W/(m·K) | ||
Thermal diffusivity | 20.0 °C | 3.8 mm²/s | |
100.0 °C | 4 mm²/s | ||
200.0 °C | 4.2 mm²/s | ||
300.0 °C | 4.6 mm²/s | ||
400.0 °C | 4.8 mm²/s | ||
500.0 °C | 4.9 mm²/s | ||
600.0 °C | 5 mm²/s | ||
700.0 °C | 5.3 mm²/s | ||
800.0 °C | 5.6 mm²/s | ||
900.0 °C | 5.9 mm²/s | ||
1000.0 °C | 6 mm²/s | ||
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 7.1E-7 Ω·m |
100.0 °C | 7.76E-7 Ω·m | |
200.0 °C | 8.49E-7 Ω·m | |
300.0 °C | 9.14E-7 Ω·m | |
400.0 °C | 9.71E-7 Ω·m | |
500.0 °C | 1.02E-6 Ω·m | |
600.0 °C | 1.07E-6 Ω·m | |
700.0 °C | 1.1E-6 Ω·m | |
800.0 °C | 1.14E-6 Ω·m | |
900.0 °C | 1.17E-6 Ω·m | |
1000.0 °C | 1.19E-6 Ω·m | |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.04 % |
Chromium | 17 - 19 % |
Manganese | 2 % |
Molybdenum | 0.2 - 0.5 % |
Nickel | 9.5 - 11.5 % |
Nitrogen | 0.1 - 0.18 % |
Phosphorus | 0.03 % |
Silicon | 0.75 % |
Sulfur | 0.015 % |
Metal
- DIN 17443 X2CrNiMoN18‑15‑4 Solution‑Annealed Stainless Steel – High‑Performance Surgical Grade
- EN 10216-5 X3CrNiN18-11: Solution-Annealed Austenitic Stainless Steel (+AT)
- DIN 17460 Grade X8CrNiTi18-10 Solution Annealed (+AT) – High‑Temperature Steel for Pressure Vessels & Nuclear Engineering
- DIN 17460 X6CrNiMo17-13 – Solution-Annealed Steel for High-Temperature Nuclear & Chemical Applications
- DIN 17460 Grade X6CrNi18-11 – Solution-Annealed High-Temperature Steel for Reactor and Chemical Applications
- DIN 17460 X3CrNiMoN17-13: Solution-Annealed Steel for High-Temperature Applications
- DIN 17460 Grade X5NiCrAlTi31-20 – Solution Annealed Steel for High‑Temperature Applications
- DIN 17460 X8CrNiMoVNb16-13 – Solution Annealed (+AT) Hardenable Austenitic Steel
- DIN 17460 Grade X8CrNiMoNb16-16 – Solution Annealed for High‑Temperature Applications
- DIN 17460 X8CrNiNb16-13: High-Temperature Solution-Annealed Steel for Turbine & Hydrogen Vessel Applications