DIN 1652-3 Grade C10 Cold-Drawn Steel – High-Performance, Wear-Resistant for Automotive and Mechanical Applications
The steel C 10 is used for wear loaded parts with low core strength in the vehicle and mechanical engineering (e.g. pins, lever, compression mouldings and stampings). The lowest application amounts to -25 °C, the best application from 5 to 10 mm nominal size. As bright steel product it is used in the form of rods (bright, straight) in different conditions (see DIN EN 10277 : 1999-10).
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.85 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | -100.0 °C | 217 GPa | |
20.0 °C | 212 GPa | ||
100.0 °C | 207 GPa | ||
200.0 °C | 199 GPa | ||
300.0 °C | 192 GPa | ||
400.0 °C | 184 GPa | ||
500.0 °C | 175 GPa | ||
600.0 °C | 164 GPa | ||
Elongation | 20.0 °C | 7 - 12 % | |
Hardness, Brinell | 20.0 °C | 131 [-] | |
Poisson's ratio | 20.0 °C | 0.28 [-] | |
Shear modulus | 23.0 °C | 82 GPa | Typical for Low Carbon Steel |
Tensile strength | 20.0 °C | 340 - 500 MPa | |
Yield strength | 20.0 °C | 180 - 400 MPa | |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | -100.0 °C | 1.08E-5 1/K | |
20.0 °C | 1.19E-5 1/K | ||
100.0 °C | 1.25E-5 1/K | ||
200.0 °C | 1.3E-5 1/K | ||
300.0 °C | 1.36E-5 1/K | ||
400.0 °C | 1.41E-5 1/K | ||
500.0 °C | 1.45E-5 1/K | ||
600.0 °C | 1.49E-5 1/K | ||
Max service temperature | 500 °C | Typical for Carbon Steel | |
Max service temperature, long | -25 - 0 °C | ||
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel | |
Specific heat capacity | -100.0 °C | 423 J/(kg·K) | |
20.0 °C | 461 J/(kg·K) | ||
100.0 °C | 479 J/(kg·K) | ||
200.0 °C | 499 J/(kg·K) | ||
300.0 °C | 517 J/(kg·K) | ||
400.0 °C | 536 J/(kg·K) | ||
500.0 °C | 558 J/(kg·K) | ||
600.0 °C | 587 J/(kg·K) | ||
Thermal conductivity | 20.0 °C | 57.5 W/(m·K) | |
100.0 °C | 55.7 W/(m·K) | ||
200.0 °C | 51.9 W/(m·K) | ||
300.0 °C | 47.6 W/(m·K) | ||
400.0 °C | 43.4 W/(m·K) | ||
500.0 °C | 39.6 W/(m·K) | ||
600.0 °C | 36 W/(m·K) | ||
Thermal diffusivity | 20.0 °C | 15.9 mm²/s | |
100.0 °C | 14.3 mm²/s | ||
200.0 °C | 12.5 mm²/s | ||
300.0 °C | 10.8 mm²/s | ||
400.0 °C | 9.2 mm²/s | ||
500.0 °C | 7.6 mm²/s | ||
600.0 °C | 6.1 mm²/s | ||
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 1.1E-7 Ω·m |
100.0 °C | 2.3E-7 Ω·m | |
200.0 °C | 3.04E-7 Ω·m | |
300.0 °C | 3.94E-7 Ω·m | |
400.0 °C | 5.01E-7 Ω·m | |
500.0 °C | 6.25E-7 Ω·m | |
600.0 °C | 7.7E-7 Ω·m | |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.07 - 0.13 % |
Manganese | 0.3 - 0.6 % |
Phosphorus | 0.05 % |
Silicon | 0.4 % |
Sulfur | 0.045 % |
Metal
- DIN 1652-3 Grade 20MoCrS4 Cold-Drawn Steel: Ideal for Wear-Resistant Mechanical Components
- DIN 1652-3: Grade 22CrMoS3-5 Cold-Drawn Steel – High Strength & Durability for Automotive & Mechanical Applications
- DIN 1652-3 Grade 20Cr4 Cold-Drawn Steel: High-Performance Wear-Resistant Material
- DIN 1652-3 Grade 20CrS4 Cold‑Drawn Steel – High Wear Resistance & Superior Machinability
- DIN 1652-3 Grade 20MnCrS5 Cold-Drawn Steel – Superior Strength & Machinability
- DIN 1652-3 Grade 20MoCr4 Cold-Drawn Steel – High Strength & Durability
- 15CrNi6 Grade 15/20 Cold-Drawn Steel – Superior Strength & Toughness for Automotive & Mechanical Parts
- DIN 1652-3 Grade 16MnCr5 Cold-Drawn Steel – High Strength & Toughness for Automotive & Mechanical Applications
- DIN 1652-3 Grade 16MnCrS5 Cold Drawn Steel – High Strength & Precision
- DIN 1652-3 Grade 17Cr3 Cold-Drawn Steel – High Wear Resistance for Automotive & Mechanical Parts