EN 573-3 Grade AW‑5083 H224 – Premium Aluminum Alloy Sheet Specification
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.66 g/cm³ | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Bending angle 90° | 3.5 °/t | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | |
4.0 °/t | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
4.5 °/t | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
Elastic modulus | 71.0 GPa | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | |||
Shear modulus | 26.8 GPa | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | |
Tensile strength | 305.0 - 380.0 MPa | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.23e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | |
20 °C | 2.23e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
20 °C | 2.42e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
20 °C | 2.4999999999999998e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
20 °C | 2.6e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
100 °C | 2.42e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
200 °C | 2.4999999999999998e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
300 °C | 2.6e-05 1/K | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 574.0 - 638.0 °C | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
Specific heat capacity | 900.0 J/(kg·K) | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar | ||
Thermal conductivity | 110.0 - 140.0 W/(m·K) | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 16000000.0 - 19000000.0 S/m | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Electrical resistivity | 5.26e-08 - 6.25e-08 Ω·m | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.05 - 0.25 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Copper | 0.1 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Iron | 0.40 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Magnesium | 4.0 - 4.9 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Manganese | 0.4 - 1.0 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Silicon | 0.4 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Titanium | 0.15 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Zinc | 0.25 % | H224 | EN 573-3, EN 1386 | Strip, Sheet, Plate, Forging, Tube, Welded Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: good | |
| Brazing | hard brazing (with flux/ without flux): poor / poor, friction soldering: acceptable, soft brazing with flux: poor | |
| Corrosion properties | Seawater: very good, weathering: very good | |
| Workability | Bending / Spinning (cold): good / sufficient, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (O) | |
Metal
- EN 573-3 Grade AW-2014A F Aluminium Alloy – Specifications & Mechanical Properties
- AW-2014A O3 – EN 573-3 Certified Aluminium Grade
- EN 573-3 Grade 3.0515 H224 – Premium Aluminium Alloy for Engineering Excellence
- AW-5154A O3 Aluminum – EN 573‑3 Certified Grade for High‑Performance Applications
- EN 573-3 Grade AW-2024 O3 – High-Strength Aluminum Alloy for Aerospace
- EN 573-3 AW-2024 F Aluminum Alloy – High Strength, Aircraft‑Grade Material
- AW-3103 H224 – EN 573-3 Standard Stainless Steel Properties
- EN 573-3 Grade AW-5083 H244 – Aluminium Alloy Properties & Standards
- AW-5083 H114 Aluminum Alloy – EN 573-3 Grade Specification
- EN 573-3 Grade AW-5086 H224 – Superior Strength & Corrosion Resistance Aluminum Alloy