home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

WL 3.3354 Grade O – High-Performance Magnesium Alloy for Corrosion-Prone Environments

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. AlMg5 has the highest Mg content of the standardized AlMg alloys, so it is badly cold formable, but the strength is the highest, so that the employment is possible for statically more highly loaded constructions. The alloy is suitable for a splinter-giving machinig on automats. It possesses sensitivity to intergranular corrosion. By a purposeful heat treatment and/or by additive of Mn or Cr the inclination to the intergranular corrosion can be reduced. Application: In the optics, in the automobile engineering for body parts, in mechanical engineering (turned parts). For joining elements (solid rivets, blind rivets, riveting nuts and screws). In the building industry for carrying constructions as well as in shipbuilding considering the sensitivity to corrosion.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

2.64 g/cm³

O

WL 3.3354

Wire

20.0 °C

2.64 g/cm³

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

71.0 GPa

O

WL 3.3354

Wire

20.0 °C

67.0 - 72.0 GPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Elongation

20.0 °C

5.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Wire

A100

20.0 °C

10.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Wire

A10

20.0 °C

12.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod

A10

20.0 °C

14.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod

20.0 °C

14.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Tube

A10

20.0 °C

16.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Tube

20.0 °C

28.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

60.0 °C

28.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

100.0 °C

32.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

140.0 °C

40.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

180.0 °C

52.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

240.0 °C

64.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

300.0 °C

100.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

360.0 °C

104.0 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Hardness, Brinell

20.0 °C

55.0 [-]

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Wire

20.0 °C

60.0 [-]

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod

20.0 °C

65.0 [-]

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Tube

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

20.0 °C

27.0 GPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Shear strength

20.0 °C

150.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Wire

Tensile strength

20.0 °C

250.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube

20.0 °C

270.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Wire

20.0 °C

280.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

100.0 °C

275.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

140.0 °C

235.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

180.0 °C

200.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

240.0 °C

140.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

300.0 °C

100.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

360.0 °C

55.0 MPa

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

-50.0 °C

2.25e-05 1/K

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

20 °C

2.31e-05 1/K

O

WL 3.3354

Wire

100 °C

2.31e-05 1/K

O

WL 3.3354

Wire

100.0 °C

2.41e-05 1/K

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

200.0 °C

2.51e-05 1/K

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

300.0 °C

2.61e-05 1/K

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Max service temperature

150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

565.0 - 640.0 °C

O

WL 3.3354

Wire

Specific heat capacity

904.0 J/(kg·K)

O

WL 3.3354

Wire

20.0 °C

904.0 J/(kg·K)

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Thermal conductivity

20.0 °C

110.0 - 140.0 W/(m·K)

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

15000000.0 - 19000000.0 S/m

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Electrical resistivity

5.26e-08 - 6.67e-08 Ω·m

O

WL 3.3354

Wire

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.2 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Copper

0.1 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Iron

0.5 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

0.50 %

O

WL 3.3354

Wire

Magnesium

4.5 - 5.6 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Manganese

0.1 - 0.6 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Silicon

0.4 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Titanium

0.2

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Zinc

0.2 %

O

DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Rod, Tube, Wire

Technological properties

Property
Workability

Good workability.


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 12165 Grade CuNi3Si1 (F00) – Premium Low‑Alloy Copper Alloy
    2. EN 12163 Grade CuNi3Si1 TB00 – Premium Low-Alloy Copper Alloy
    3. EN 12163 CuNi3Si1 TH: High-Performance Hardenable Copper Alloy
    4. EN 10305-5 Grade St 33 Welded Precision Steel Tubes
    5. X6CrNb17 Soft Annealed Ferritic Steel – Enhanced Corrosion Resistance for Industrial Applications
    6. WL 3.3354 Grade F – High‑Strength, Corrosion‑Resistant Aluminum Alloy
    7. WL 3.3354 H12 Alloy – Grade 3.3354: Superior Corrosion Resistance & Strength
    8. WL 3.3354 – Grade 3.3354 H18 Magnesium Alloy: Superior Corrosion Resistance & Weldability
    9. WL 3.3354 (Grade 3.3354 H28) – High‑Performance Magnesium Alloy
    10. DIN 1725-1 Grade 3.3354 H14: High-Strength Magnesium Alloy with Excellent Corrosion Resistance