AW‑5051A H111 AlMg Alloy – EN 573‑3 Grade, Food‑Safe & High Strength
Naturally hard AlMg alloy. The alloy is food safe.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.69 g/cm³ | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | |
20.0 °C | 2.68 g/cm³ | H111 | EN 573-3 | Rod, Tube |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | ||
Elongation | 16.0 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | A50 | |
18.0 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | A100 | ||
20.0 °C | 16.0 % | H111 | EN 573-3 | Rod, Tube | A50 | |
20.0 °C | 18.0 % | H111 | EN 573-3 | Rod, Tube | ||
Hardness, Brinell | 20.0 °C | 40.0 [-] | H111 | EN 573-3 | Rod, Tube | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 26.5 GPa | H111 | EN 573-3 | Rod, Tube | |
Tensile strength | 20.0 °C | 150.0 - 200.0 MPa | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.38e-05 1/K | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | |
100 °C | 2.38e-05 1/K | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | ||
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium | ||||
Specific heat capacity | 20.0 °C | 921.0 J/(kg·K) | H111 | EN 573-3 | Rod, Tube | |
Thermal conductivity | 20.0 °C | 135.0 - 167.0 W/(m·K) | H111 | EN 573-3 | Rod, Tube |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 22000000.0 - 26000000.0 S/m | H111 | EN 573-3 | Rod, Tube | |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Copper | 0.05 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Iron | 0.45 % | H111 | EN 573-3 | Rod, Tube |
0.45 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire | |
Magnesium | 1.4 - 2.1 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Manganese | 0.25 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Silicon | 0.3 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Titanium | 0.1 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Zinc | 0.2 % | H111 | EN 573-3, EN 755 | Rod, Tube, Wire |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): ausreichend - ungeeignet / mangelhaft, friction soldering: good, soft brazing with flux: sufficient | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / acceptable (H12) | |
Metal
- EN 573-3 Grade 3.0915 (H111) – Premium Aluminium Alloy
- EN 573-3 Grade 3.3326 H111 – Detailed Mechanical Properties of 5000 Series Aluminium
- EN 573-3 Grade 3.0505 H111 Aluminium Alloy - Technical Specifications
- AW‑5186 H111 Aluminium Alloy – EN 573‑3 Certified for High‑Performance Applications
- EN 573-3 Grade 3.0257 H111 Aluminium Alloy Specifications
- EN 573-3 Grade 3.3549 H111 Aluminium Alloy – Technical Specifications and R&D Services
- EN 573-3 Grade 3.1325 H111 – Aluminium Alloy Properties & Standards
- EN 573-3 Grade 3.2315 H111 – Detailed Aluminium Alloy Specifications
- EN 573-3 Grade 3.0515 H111 Steel – Comprehensive Properties & Compliance
- AW‑5051A F – Food‑Safe, High‑Strength AlMg Alloy (EN 573‑3)