RT130X Epoxy Tube – Flame‑Resistant, UL94 V‑0, NEMA FR‑4 Certified
Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.
Properties
General
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Density | 1.96 g/cm³ | ASTM D792 | |
Moisture absorption | 0.05 % | ASTM D570 | Condition D₁-24/23 |
Mechanical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Compressive modulus | 8.6 GPa | ASTM D695 | Condition A |
Compressive strength | 348.2 MPa | ASTM D695 | Condition A |
Elastic modulus | 1.7 GPa | ASTM D638 | Condition A |
Hardness, Rockwell M | 115 [-] | ASTM D785 | |
Tensile strength | 420.6 MPa | ASTM D638 | Condition A |
Thermal
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, electrical | 140 °C | ¹ | |
Relative temperature index, mechanical strength | 140 °C | ¹ | |
Flammability | UL Bulletin 94, Class V-0 | ||
Electrical
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Dielectric strength | 18.7 kV/mm | ASTM D149 | Condition D-48/50 |
19.68 kV/mm | ASTM D149 | Condition A |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Typical applications include bushings, spacers and other structural parts. | |
| Fillers | Glass Fabric | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use 2.The mechanical properties are converted from American unit system to International unit system. | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |
Composite material
- Epoxy RT521M Tube – High-Performance Cryogenic Composite Material
- High-Performance Epoxy RT130M Tube – Flame Resistant & UL94 V-0 Certified
- Epoxy RT130 Tube – Flame‑Resistant, UL94 V‑0, NEMA G‑10 Grade
- RT571 Epoxy Tubes – High‑Temperature, Thick‑Wall Performance
- RTB326 Epoxy Tube – High Strength, Low Moisture, ASTM F3131 Type FB Certified
- RT130X Epoxy Tube – Flame‑Resistant, UL94 V‑0, NEMA FR‑4 Certified
- High-Performance Epoxy RT511F Tubes – G-10 & MIL Standard Certified
- RT511M Epoxy Tube – NEMA G‑10 Rated, High‑Temperature Strength
- RT500M Epoxy Tube: High-Performance, Moisture-Resistant Composite Material
- RT500X Epoxy Tube – Superior Heat & Humidity Resistance for Industrial Use