EN 10137-3 Grade S500A: Quenched & Tempered Fine‑Grained Steel for Structural Applications

The make X12Cr13 is comparable to X 10 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for construction parts in water and steam and mild acting media of food industry, predominantly in tempered condition (fitting parts, valve spindles, shafts, pump components, bolts, screws) with hone

Make X20Cr13 is comparable to X 20 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for construction parts of higher strength and higher mechanical load, such as axles, shafts, pump components, piston rods, valve cones, nozzle needles, ship`s propeller, but also beater bars, surgical in

Make X30Cr13 is comparable to X 30 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for the production of cutting tools (knife blades, scissors, cutting surgical instruments), bearing balls, wear resistant construction parts for control and pump components, springs, piston rods, screws.

Material G17CrMoV5-10 is equivalent to trademark GS-17 CrMoV 5 11 acc. to DIN17245-87. It is used at room temperature and increased temperatures as well as at increased pressures for thick-walled castings, e.g. for high-stress turbine casings and nozzle boxes in turbine pressure vessel and steam boi