EN 10209 DC03ED: Cold-Rolled, Skin-Passed Low-Carbon Steel for Enamel Applications
Cold rolled low carbon steel for flat products for vitreous enamelling (direct enamelling, as well as for special applications of conventional two coat enamelling for better sag resistance). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage,The soft unalloyed steel DCO1ED, mat. No. 1.0399, is a cold formable steel and suitable for direct enameling as well as for special conventional applications of two-coat enameling, especially if there should be preferably enameled non deforming. In this case are necessary special measures in order to improve enamel`s adhesion. Mechanical specific values and freedom of stretcher strains are warranted for 6 months. Application: simple reforming parts pots, pans, covering caps for gas kitchen stoves, baking sheets, simple shower bases etc. Welding: DC01ED is weldable acc. to the fusion welding methods: MAG (metal active gas/plasma welding arc hand welding laser welding gas welding resistance welding (spot, roll seam, buckle welding)
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 20.0 °C | 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 20.0 °C | 200 - 215 GPa | Typical for Low Carbon Steel |
Elongation A80 | 20.0 °C | 34 % | |
Elongation A80, transverse | 20.0 °C | 30 - 34 % | |
Poisson's ratio | 20.0 °C | 0.29 [-] | Typical for Low Carbon Steel |
Tensile strength | 20.0 °C | 270 - 370 MPa | |
Tensile strength, transverse | 20.0 °C | 270 - 370 MPa | |
Yield strength | 20.0 °C | 140 - 240 MPa | |
Yield strength, transverse | 20.0 °C | 140 - 280 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 20.0 °C | 1.32E-5 - 1.38E-5 1/K | Typical for Low Carbon Steel |
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 4E-3 % |
Manganese | 0.4 % |
Phosphorus | 0.04 % |
Sulfur | 0.05 % |
Metal
- EN 10139 Grade RRSt 3 – Cold‑Rolled, Skin‑Passed Steel for High‑Performance Tooling
- EN 10139 Grade St 2 Cold Rolled Steel – Skin-Passed, High Strength & Weldable
- EN 10139 St. 2 Cold‑Rolled, Skin‑Passed Steel (K32) – Superior Strength & Weldability
- EN 10139 Grade St 4 Cold-Rolled, Skin-Passed Steel (K32) – High Strength & Formability
- EN 10139 Grade USt 3: Cold‑Rolled, Skin‑Passed Steel for High‑Performance Applications
- EN 10139 DC05 Cold Rolled Low‑Carbon Steel – Skin Pass Grade
- EN 10139 Grade DC01 Cold-Rolled Steel – Skin-Passed, Ideal for Precision Cold Forming
- EN 10139 Grade DC03: Cold Rolled, Skin-Passed Low-Carbon Steel Strip
- EN 10139 Grade DC04 Cold-Rolled Steel – High-Quality, Skin-Passed, Ideal for Cold Forming
- EN 10139 Grade DC06 Cold Rolled Low-Carbon Steel – Skin Passed