EN 10132-4 Grade C55S Quenched & Tempered Steel – Ideal for Springs & Cold-Rolled Strips

Material G17CrMo5-5 is equivalent to trademark GS-17 CrMo 5 5 acc. to DIN17245-87. It is used at room temperature and increased temperatures for thick-walled castings, for turbines, pressure vessels and steam boilers, e.g. for casings, fittings and valve boxes.PropertiesGeneralPropertyTemperatureVal

Material G20Mo5 is equivalent to trademark GS-22 Mo 4 acc. to DIN 17245-87. It is used at room temperature and increased temperatures. The DIN-make is used for turbine parts at temperatures from 300 to 450 °C and mean pressure, e.g. for casings and fittings.PropertiesGeneralPropertyTemperatureValueD

Material GX4CrNi13-4 is used at room temperature and incrased temperaturesPropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C220 GPaTypical for Martensitic Stainless SteelElongation20.0 °C15 %Poisson's ratio23.0 °C0.3 [

Material GX4CrNiMo16-5-1 is equivalent to trademark G-X 5 CrNiMo 16 5 acc. to SEW410-88. It is applicated at room temperature and increased temperatures. The DIN-make is used for castings with increased strength, ductility and corrosion properties for water turbines, pumps and fittings, compressors