home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

EN 10269 X2CrNiMoN17-13-3 – High‑Strength, Corrosion‑Resistant Austenitic Steel, Solution Annealed (+AT)

Trademark X2CrNiMoN17-13-3 is comparable to X 2 CrNiMoN 17 13 3 acc. to DIN 17440-85. This material is a fully austenitic steel that is suitable for mirror finishing. It shows higher strength by N-alloying, by Mo-addition higher corrosion resistance especially to non-oxidizing acids and halogenated media than 1.4406. Higher resistance to selective attack than 1.4435, excellent limiting fatigue strength behavior also under chemical loading. Good low temperature toughness, therefore suitable in refrigeration up to -270 °C, approved for pressure vessel construction. Further application for mounting elements at increased and lower temperatures.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8 - 8.01 g/cm³

Mechanical

PropertyTemperatureValue

Elastic modulus

-100.0 °C

206 GPa

20.0 °C

196 - 200 GPa

100.0 °C

190 - 194 GPa

200.0 °C

182 - 186 GPa

300.0 °C

174 - 179 GPa

400.0 °C

166 - 172 GPa

500.0 °C

158 - 165 GPa

600.0 °C

150 GPa

700.0 °C

142 GPa

800.0 °C

134 GPa

Elongation

20.0 °C

40 %

Poisson's ratio

20.0 °C

0.28 [-]

Shear modulus

20.0 °C

77.3 GPa

Tensile strength

20.0 °C

580 - 800 MPa

50.0 °C

550 MPa

100.0 °C

520 MPa

150.0 °C

490 MPa

200.0 °C

460 MPa

250.0 °C

450 MPa

300.0 °C

440 MPa

350.0 °C

435 MPa

400.0 °C

435 MPa

450.0 °C

435 MPa

500.0 °C

430 MPa

550.0 °C

410 MPa

600.0 °C

380 MPa

Yield strength Rp0.2

20.0 °C

280 MPa

50.0 °C

256 MPa

100.0 °C

215 MPa

150.0 °C

195 MPa

200.0 °C

175 MPa

250.0 °C

165 MPa

300.0 °C

155 MPa

350.0 °C

150 MPa

400.0 °C

145 MPa

450.0 °C

140 MPa

500.0 °C

138 MPa

550.0 °C

136 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

-100.0 °C

1.49E-5 1/K

20.0 °C

1.61E-5 1/K

100.0 °C

1.6E-5 - 1.67E-5 1/K

200.0 °C

1.65E-5 - 1.72E-5 1/K

300.0 °C

1.7E-5 - 1.77E-5 1/K

400.0 °C

1.75E-5 - 1.81E-5 1/K

500.0 °C

1.8E-5 - 1.84E-5 1/K

600.0 °C

1.88E-5 1/K

700.0 °C

1.91E-5 1/K

800.0 °C

1.94E-5 1/K

900.0 °C

1.97E-5 1/K

1000.0 °C

2E-5 1/K

Max service temperature, long

-270 - 0 °C

Melting point

1230 - 1480 °C

Typical for Austenitic Stainless Steel

Specific heat capacity

-100.0 °C

440 J/(kg·K)

20.0 °C

472 - 500 J/(kg·K)

100.0 °C

487 J/(kg·K)

200.0 °C

503 J/(kg·K)

300.0 °C

512 J/(kg·K)

400.0 °C

520 J/(kg·K)

500.0 °C

530 J/(kg·K)

600.0 °C

541 J/(kg·K)

700.0 °C

551 J/(kg·K)

800.0 °C

559 J/(kg·K)

900.0 °C

565 J/(kg·K)

1000.0 °C

571 J/(kg·K)

Thermal conductivity

20.0 °C

13.5 - 15 W/(m·K)

100.0 °C

14.9 W/(m·K)

200.0 °C

16.7 W/(m·K)

300.0 °C

18.3 W/(m·K)

400.0 °C

19.8 W/(m·K)

500.0 °C

21.3 W/(m·K)

600.0 °C

22.7 W/(m·K)

700.0 °C

24.2 W/(m·K)

800.0 °C

25.6 W/(m·K)

Thermal diffusivity

20.0 °C

3.6 mm²/s

100.0 °C

3.7 mm²/s

200.0 °C

4 mm²/s

300.0 °C

4.4 mm²/s

400.0 °C

4.6 mm²/s

500.0 °C

4.7 mm²/s

600.0 °C

4.9 mm²/s

700.0 °C

5.2 mm²/s

800.0 °C

5.5 mm²/s

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

7.5E-7 - 7.75E-7 Ω·m

100.0 °C

8.42E-7 Ω·m

200.0 °C

9.04E-7 Ω·m

300.0 °C

9.62E-7 Ω·m

400.0 °C

1.01E-6 Ω·m

500.0 °C

1.06E-6 Ω·m

600.0 °C

1.1E-6 Ω·m

700.0 °C

1.13E-6 Ω·m

800.0 °C

1.16E-6 Ω·m

Chemical properties

PropertyValue

Carbon

0.03 %

Chromium

16.5 - 18.5 %

Manganese

2 %

Molybdenum

2.5 - 3 %

Nickel

11 - 14 %

Nitrogen

0.12 - 0.22 %

Phosphorus

0.05 %

Silicon

1 %

Sulfur

0.015 - 0.03 %


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 10269 X2CrNi18-9 Stainless Steel – Solution Annealed with Post-Annealing Treatment
    2. EN 10269 Grade X3CrNiCu18-9-4 – Solution Annealed Stainless Steel for High‑Temperature Applications
    3. EN 10269 Grade X4CrNi18-12 – Solution Annealed with Enhanced Treatment
    4. EN 10269 X6CrNiTiB18-10 – Solution‑Annealed High‑Temperature Steel (AT)
    5. EN 10269 X3CrNiMoBN17-13-3 Solution Annealed Steel for Power Plant Superheaters and High‑Temperature Components
    6. EN 10269 X5CrNiMo17-12-2 Solution Annealed (+AT) – Premium Austenitic Steel for Chemical & Pharma Applications
    7. EN 10269: X6CrNi18-10 Austenitic Steel – Solution Annealed & Post‑Annealing Treatment
    8. EN 10269 X6CrNiMoB17-12-2 Solution-Annealed Steel (+AT): High-Temperature Austenitic Steel for Power Plants & Chemical Applications
    9. EN 10269 X2CrNiMo17-12-2 Solution-Annealed Steel – Superior Corrosion Resistance & Formability
    10. EN 10222-5 Grade X2CrNiMoN17-13-3 – Solution Annealed Steel with Superior Corrosion Resistance