home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

EN 10222-5 Grade X2CrNiMoN17-13-3 – Solution Annealed Steel with Superior Corrosion Resistance

Trademark X2CrNiMoN17-13-3 is a fully austenitic mirror finishable steel which shows by N-alloying higher strength, due to stronger Mo-addition higher corrosion resistance especially to non-oxidizing acids and halogenated media than steel 1.4406. To the comparable DIN-make X 2 CrNiMoN 17 13 3 acc. to DIN 17440 : 1985-07 applies: The material shows higher resistance to selective attack than steel 1.4435 and has an excellent limiting fatigue stress behavior also under chemical loading. Good low temperature toughness, therefore suitable for refrigeration up to -270 °C., approved for pressure vessel construction.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8 - 8.01 g/cm³

Mechanical

PropertyTemperatureValue

Elastic modulus

-100.0 °C

206 GPa

20.0 °C

196 - 200 GPa

100.0 °C

190 - 194 GPa

200.0 °C

182 - 186 GPa

300.0 °C

174 - 179 GPa

400.0 °C

166 - 172 GPa

500.0 °C

158 - 165 GPa

600.0 °C

150 GPa

700.0 °C

142 GPa

800.0 °C

134 GPa

Elongation

20.0 °C

35 - 45 %

Poisson's ratio

20.0 °C

0.28 [-]

Shear modulus

20.0 °C

77.3 GPa

Tensile strength

20.0 °C

580 - 780 MPa

Yield strength Rp0.2

20.0 °C

280 MPa

Yield strength Rp1.0

20.0 °C

315 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

-100.0 °C

1.49E-5 1/K

20.0 °C

1.61E-5 1/K

100.0 °C

1.6E-5 - 1.67E-5 1/K

200.0 °C

1.65E-5 - 1.72E-5 1/K

300.0 °C

1.7E-5 - 1.77E-5 1/K

400.0 °C

1.75E-5 - 1.81E-5 1/K

500.0 °C

1.8E-5 - 1.84E-5 1/K

600.0 °C

1.88E-5 1/K

700.0 °C

1.91E-5 1/K

800.0 °C

1.94E-5 1/K

900.0 °C

1.97E-5 1/K

1000.0 °C

2E-5 1/K

Max service temperature, long

-270 - 0 °C

Melting point

1230 - 1480 °C

Typical for Austenitic Stainless Steel

Specific heat capacity

-100.0 °C

440 J/(kg·K)

20.0 °C

472 - 500 J/(kg·K)

100.0 °C

487 J/(kg·K)

200.0 °C

503 J/(kg·K)

300.0 °C

512 J/(kg·K)

400.0 °C

520 J/(kg·K)

500.0 °C

530 J/(kg·K)

600.0 °C

541 J/(kg·K)

700.0 °C

551 J/(kg·K)

800.0 °C

559 J/(kg·K)

900.0 °C

565 J/(kg·K)

1000.0 °C

571 J/(kg·K)

Thermal conductivity

20.0 °C

13.5 - 15 W/(m·K)

100.0 °C

14.9 W/(m·K)

200.0 °C

16.7 W/(m·K)

300.0 °C

18.3 W/(m·K)

400.0 °C

19.8 W/(m·K)

500.0 °C

21.3 W/(m·K)

600.0 °C

22.7 W/(m·K)

700.0 °C

24.2 W/(m·K)

800.0 °C

25.6 W/(m·K)

Thermal diffusivity

20.0 °C

3.6 mm²/s

100.0 °C

3.7 mm²/s

200.0 °C

4 mm²/s

300.0 °C

4.4 mm²/s

400.0 °C

4.6 mm²/s

500.0 °C

4.7 mm²/s

600.0 °C

4.9 mm²/s

700.0 °C

5.2 mm²/s

800.0 °C

5.5 mm²/s

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

7.75E-7 Ω·m

100.0 °C

8.42E-7 Ω·m

200.0 °C

9.04E-7 Ω·m

300.0 °C

9.62E-7 Ω·m

400.0 °C

1.01E-6 Ω·m

500.0 °C

1.06E-6 Ω·m

600.0 °C

1.1E-6 Ω·m

700.0 °C

1.13E-6 Ω·m

800.0 °C

1.16E-6 Ω·m

Chemical properties

PropertyValue

Carbon

0.03 %

Chromium

16.5 - 18.5 %

Manganese

2 %

Molybdenum

2.5 - 3 %

Nickel

11 - 14 %

Nitrogen

0.12 - 0.22 %

Phosphorus

0.05 %

Silicon

1 %

Sulfur

0.015 %


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 10222-5 X2CrNi18-9 Solution-Annealed Steel (+AT) – High Corrosion & Mechanical Strength
    2. EN 10222-5 Grade X2CrNiCu19-10 – Solution Annealed Stainless Steel (AT)
    3. EN 10222-5 Grade X2CrNiMo17-12-3: Solution Annealed + AT – Premium Austenitic Steel
    4. EN 10222-5 X3CrNiMo18-12-3 – Solution Annealed Stainless Steel, Ideal for Pressure Vessels
    5. EN 10222-5 Grade X7CrNiNb18-10 – Solution-Annealed Stainless Steel for Corrosion‑Resistant Pressure Vessels
    6. EN 10222‑5 X6CrNiTiB18‑10 Solution‑Annealed Steel for High‑Temperature Applications
    7. EN 10269 X2CrNiMoN17-13-3 – High‑Strength, Corrosion‑Resistant Austenitic Steel, Solution Annealed (+AT)
    8. EN 10222-5 Grade X2CrNiMoN17-11-2 – Solution Annealed Steel with Enhanced Corrosion Resistance
    9. EN 10222-5 X5CrNiMo17-12-2: Solution-Annealed Austenitic Steel for Chemical & Pharmaceutical Use
    10. EN 10222-5 Grade X6CrNi18-10 (Solution Annealed + AT): High‑Temperature Austenitic Steel for Reactor, Boiler, and Chemical Applications