DIN 2391-2 Grade St 45 Soft Annealed Steel Tube – Precision, Thin Walls, Superior Surface
Seamless precision steel tube made from St 45 is mainly used as construction element with special requirements in dimension accuracy, small wall thicknesses and good surface condition. The tubes are made in different grades (A and C). Grade C is valid for conduits. Grade A: for mechanical load without special grade requirement, without inspection certificate Grade C: for special requirements (testing after arrangement, e.g. bending, flanging, bulging a.o.) The weldability is given.
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 200 - 215 GPa | Typical for Low Carbon Steel |
Elongation | 20.0 °C | 21 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for Low Carbon Steel |
Shear modulus | 23.0 °C | 82 GPa | Typical for Low Carbon Steel |
Tensile strength | 20.0 °C | 390 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.32E-5 - 1.38E-5 1/K | Typical for Low Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel | |
Max service temperature, long | 0 - 300 °C | ||
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel | |
Specific heat capacity | 23.0 °C | 465 J/(kg·K) | Typical for Low Carbon Steel |
Thermal conductivity | 23.0 °C | 25 - 93 W/(m·K) | Typical for Low Carbon Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.21 % |
Manganese | 0.4 % |
Phosphorus | 0.03 % |
Silicon | 0.35 % |
Sulfur | 0.025 % |
Metal
- DIN 17442 X38CrMoV15 Soft-Annealed Stainless Steel – Superior Corrosion Resistance
- DIN 17210 Grade 21NiCrMo2 Soft Annealed Steel – Superior Wear Resistance & Fatigue Strength
- DIN 2391-2 St 30 Al Seamless Steel Tube – Soft Annealed, Grade A
- DIN 2391-2 St 30 Si Soft‑Annealed Tube – Grade A for Precision Construction
- DIN 2391-2 Grade St 45 Soft Annealed Steel Tube – Precision, Thin Walls, Superior Surface
- DIN 2391-2 Grade St 52 Bright Drawn Steel Tube – Precision, Low Wall Thickness, Excellent Surface Finish
- DIN 2391-2 St 52 Soft Annealed Steel Tube – Grade A – Precision Seamless Construction Element
- DIN 2391-2 Grade St 35 Bright Drawn Soft Steel Tubes – Precision, Low Wall Thickness, Excellent Surface Finish
- DIN 2391‑2 St 35 Soft Annealed Steel Tubes – Precision, Low Wall Thickness, Reliable Weldability
- DIN 2391-2 St 45 Steel Tube – Bright Drawn, Soft, Precision-Engineered