EN 573-3 AW-4015 H111 Aluminum Alloy – Food‑Safe, High‑Strength Sheet & Plate
Material EN AW-Al Si2Mn is produced for sheet, strip and plates. The alloy is food-safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.71 g/cm³ | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 71.0 GPa | Typical for Wrought 4000 Series Aluminium | ||||
Hardness, Brinell | 35.0 [-] | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 35.0 [-] | H111 | EN 573-3 | Flat | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 4000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 4000 Series Aluminium | ||||
Shear modulus | 26.0 GPa | Typical for Wrought 4000 Series Aluminium | ||||
Tensile strength | 150.0 | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 150.0 | H111 | EN 573-3 | Flat |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 1.2e-05 - 2.2e-05 1/K | Typical for Wrought 4000 Series Aluminium |
Melting point | 520.0 - 630.0 °C | Typical for Wrought 4000 Series Aluminium |
Specific heat capacity | 864.0 J/(kg·K) | Typical for Wrought 4000 Series Aluminium |
Thermal conductivity | 138.0 - 155.0 W/(m·K) | Typical for Wrought 4000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 23000000.0 - 30000000.0 S/m | Typical for Wrought 4000 Series Aluminium |
Electrical resistivity | 3.8e-08 - 5e-08 Ω·m | Typical for Wrought 4000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Copper | 0.2 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Iron | 0.70 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate |
0.7 % | H111 | EN 573-3 | Flat | |
Magnesium | 0.1 - 0.5 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Manganese | 0.6 - 1.2 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Silicon | 1.4 - 2.2 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Zinc | 0.2 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat |
Technological properties
| Property | ||
|---|---|---|
| Workability | Moderate Workability | |
Metal
- EN 573-3 Grade 3.0915 (H111) – Premium Aluminium Alloy
- EN 573-3 Grade 3.3326 H111 – Detailed Mechanical Properties of 5000 Series Aluminium
- EN 573-3 Grade 3.0505 H111 Aluminium Alloy - Technical Specifications
- AW‑5186 H111 Aluminium Alloy – EN 573‑3 Certified for High‑Performance Applications
- EN 573-3 Grade 3.0257 H111 Aluminium Alloy Specifications
- EN 573-3 Grade 3.3549 H111 Aluminium Alloy – Technical Specifications and R&D Services
- EN 573-3 Grade 3.1325 H111 – Aluminium Alloy Properties & Standards
- EN 573-3 Grade 3.2315 H111 – Detailed Aluminium Alloy Specifications
- EN 573-3 Grade 3.0515 H111 Steel – Comprehensive Properties & Compliance
- EN 573-3 Grade 3.0525 H111 – High-Quality Aluminum Alloy for Industrial Applications