EN 573-3 AW-6061 F Aluminum Alloy – Premium, Corrosion-Resistant, Weldable 6061 Grade
EN AW-6061 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.
Quantity: 1 PCSBIKAR-METALLE GMBH
MANUFACTURER AND DISTRIBUTOR
Information and services
Additional services: Cuttings, Parts from drawingsProperties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.7 g/cm³ | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 69.0 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |
70.0 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
Hardness, Brinell | 40.0 [-] | F | EN 573-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 6000 Series Aluminium | |||
Shear modulus | 26.3 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |
Tensile strength | 120.0 - 200.0 MPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Wire, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |
20 °C | 2.36e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
100 °C | 2.3e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
100 °C | 2.36e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
Melting point | 580.0 - 640.0 °C | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
580.0 - 650.0 °C | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |||
Specific heat capacity | 887.0 - 963.0 J/(kg·K) | Typical for Wrought 6000 Series Aluminium | ||||
Thermal conductivity | 155.0 - 180.0 W/(m·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | ||
170.0 - 200.0 W/(m·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 22000000.0 - 30000000.0 S/m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
23000000.0 - 27000000.0 S/m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar | |
Electrical resistivity | 3.33e-08 - 4.55e-08 Ω·m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
3.7e-08 - 4.35e-08 Ω·m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.04 - 0.35 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Copper | 0.15 - 0.4 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Iron | 0.70 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Magnesium | 0.8 - 1.2 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Manganese | 0.15 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Silicon | 0.4 - 0.8 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Titanium | 0.15 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Zinc | 0.25 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Wire, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: acceptable, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): good / sufficient, friction soldering: good, soft brazing with flux: acceptable | |
| Corrosion properties | Seawater: good to acceptable, weathering: good | |
| Workability | Bending / Spinning (cold): acceptable (T3, T4) / good (O), Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) good (O) / good (O) | |
Metal
- EN 573-3 Grade 3.0505 F Aluminium Alloy: Properties & Standards
- EN 573-3 Grade 3.1305 F Aluminium Alloy – Key Mechanical Properties
- EN 573-3 Grade 3.1305 O Aluminium: Key Mechanical Properties & Standards
- EN 573-3 Grade 3.1305 O3 – Comprehensive Aluminium Alloy Specifications
- EN 573-3 Grade 3.3316 F – Key Properties & Standards for 5000 Series Aluminium
- EN 573-3 Grade AW-6061 H18 Aluminum Alloy – Superior Corrosion Resistance & Weldability
- EN 573-3 Grade AW-6061 T39 – Premium Aluminum Alloy for Anodizing & Corrosion Resistance
- EN 573-3 Grade AW-6061 O3 – Premium Aluminum Alloy for Corrosion Resistance
- EN 573-3 AW-6061 F Aluminum Alloy – Premium, Corrosion-Resistant, Weldable 6061 Grade
- EN 573-3 Grade AW-6061 H111 – Premium Aluminum Alloy for Corrosion Resistance & Easy Fabrication