UNS R56320 Titanium Alloy: Medium Strength & Superior Corrosion Resistance for Aerospace & Industrial Use
Titanium UNS R56320 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. UNS R56320 Titanium can be used at higher temperatures than Grades 1 through 4. UNS R56320 titanium has good cold rolling properties.
Properties
General
| Property | Value | Shape |
|---|---|---|
Density | 4.48 g/cm³ | Sheet, Billet, Tube |
Dimension
| Property | Value | Shape |
|---|---|---|
Diameter | 5 mm | Tube |
25.4 mm | Billet | |
125 mm | Billet | |
130 mm | Tube | |
Length | 1000 mm | Tube |
1500 mm | Sheet | |
5000 mm | Sheet, Tube | |
6500 mm | Sheet | |
Wall thickness | 0.5 - 9.0 mm | Tube |
2.5 - 21.0 mm | Billet | |
Width | 400 mm | Sheet |
600 mm | Sheet | |
1524 mm | Sheet | |
1600 mm | Sheet |
valueMetaData
| Property | Value |
|---|
Mechanical
| Property | Value | Shape |
|---|---|---|
Elastic modulus | 103.0 GPa | Sheet, Billet, Tube |
Elongation | 15.0 % | Billet |
Hardness, Brinell | 256.0 | Billet, Tube |
Hardness, Rockwell C | 24.0 [-] | Billet, Tube |
Hardness, Vickers | 280.0 | Billet, Tube |
Poisson's ratio | 0.3 [-] | Billet, Tube |
Shear modulus | 44.0 GPa | Billet, Tube |
Tensile strength | 620.0 MPa | Sheet, Billet, Tube |
Yield strength | 520.0 MPa | Sheet, Billet, Tube |
Thermal
| Property | Value | Shape | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 8.400000000000001e-06 - 8.599999999999999e-06 1/K | Typical for Titanium | |
Melting point | 1700.0 °C | Billet, Tube | |
Thermal conductivity | 8.3 W/(m·K) | Sheet, Billet, Tube |
Chemical properties
| Property | Value | Shape |
|---|---|---|
Aluminium | 3.0 | Sheet, Billet, Tube |
Vanadium | 2.5 | Sheet, Billet, Tube |
Metal
- EDX 2304 Square Tube – High-Performance Duplex Stainless Steel for Corrosion Resistance
- UNS S31803 Duplex Stainless Steel Plate – High Strength & Corrosion Resistance
- EN 573-3 Grade AW-2014A F Aluminium Alloy – Specifications & Mechanical Properties
- AW-2014A O3 – EN 573-3 Certified Aluminium Grade
- UNS R53400: High-Performance Alloy with Superior Corrosion Resistance
- UNS R56410 Titanium Beta Alloy – Superior Strength & Heat‑Treatability
- AW-5154A O3 Aluminum – EN 573‑3 Certified Grade for High‑Performance Applications
- UNS R50700 Titanium: The Strongest, Most Corrosion‑Resistant Grade
- UNS R58153: Metastable‑Beta Alloy for Aerospace Sheet Metal, Foils, and Castings
- Sandvik 1RK95 Stainless Steel – Annealed Condition & Key Properties