3004 H45 Aluminum Wrought Alloy – Non-Heat-Treatable, High Strength & Corrosion Resistance
Stronger than 1200, 3003 and 3103 for similar applications. Good for chemical and food contact applications.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 2.72 g/cm³ |
Dimension
| Property | Value |
|---|---|
Thickness | 0.18 - 0.3 mm |
Mechanical
| Property | Temperature | Value |
|---|---|---|
Elastic modulus | 23.0 °C | 68.6 GPa |
Elongation A50 | 23.0 °C | 3 % |
Shear modulus | 23.0 °C | 26 GPa |
Tensile strength | 23.0 °C | 225 - 270 MPa |
Yield strength | 23.0 °C | 175 - 245 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 100.0 °C | 2.4E-5 1/K | 20-100°C |
Thermal conductivity | 23.0 °C | 163 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 23.0 °C | 4.1E-8 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Copper | 0.25 % |
Iron | 0.7 % |
Magnesium | 0.8 - 1.3 % |
Manganese | 1 - 1.5 % |
Silicon | 0.3 % |
Zinc | 0.25 % |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | Good (For surface protection only) | |
| Application areas | Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels, Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Furniture, Plinths, Blinds: Intermediate transformation/interior use; Heat exchangers: Fins; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Food can: Body, Lids; Semi-rigid and corrugated: Smooth wall | |
| Brazing | Very Good | |
| Corrosion properties | Good | |
| Welding | Very Good | |
| Workability | Good | |
Metal
- 5252-O: High-Purity, Non-Heat-Treatable Aluminum Wrought Alloy for Superior Brightening and Anodizing
- 1350 H19 Non-Heat-Treatable Al Wrought Alloy – High Conductivity & Mechanical Strength
- 8011A O – Non‑Heat Treatable Aluminum Wrought Alloy: Key Properties & Applications
- 8014 H21 – High-Strength Non-Heat-Treatable Aluminum Wrought Alloy
- 1200O Aluminum Wrought Alloy – Superior Corrosion Resistance & Workability
- 3105A H28 Non-Heat-Treatable Aluminum Alloy – Low‑to‑Medium Strength, Superior Corrosion Resistance
- High-Performance 5251 H18 Aluminum Alloy – Medium Strength, Excellent Formability & Corrosion Resistance
- 3004 H24 Aluminum Wrought Alloy – Superior Strength for Chemical & Food Contact
- 5251 O: High-Strength, Formable Non-Heat-Treatable Aluminum Wrought Alloy
- 3103-O: High-Strength, Non-Heat-Treatable Aluminum Alloy for Structural Applications