AW-5026 H111 Aluminium Alloy – EN 573‑3 Certified Food‑Safe Grade
Naturally hard AlMg alloy. The alloy is food safe.
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.69 g/cm³ | H111 | EN 573-3, EN 1386, EN 485 | Strip, Sheet, Plate |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 69.0 - 70.0 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Elongation | 5.0 % | H111 | EN 573-3, EN 1386 | Strip, Sheet, Plate | A50 | |
6.0 % | H111 | EN 573-3, EN 1386, EN 485 | Strip, Sheet, Plate | A100 | ||
9.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | A100 | ||
10.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | A100 | ||
11.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | A100 | ||
12.0 % | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | A50 | ||
20.0 °C | 5.0 % | H111 | EN 573-3 | Plate | A50 | |
20.0 °C | 6.0 % | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 6.0 % | H111 | EN 573-3 | Plate, Sheet | ||
20.0 °C | 9.0 % | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 9.0 % | H111 | EN 573-3 | Sheet | ||
20.0 °C | 10.0 % | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 10.0 % | H111 | EN 573-3 | Sheet | ||
20.0 °C | 11.0 % | H111 | EN 573-3 | Flat | Transverse | |
20.0 °C | 11.0 % | H111 | EN 573-3 | Flat | ||
20.0 °C | 12.0 % | H111 | EN 573-3 | Flat | A50 Transverse | |
20.0 °C | 12.0 % | H111 | EN 573-3 | Flat | A50 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||||
Shear modulus | 26.0 - 26.5 GPa | Typical for Wrought 5000 Series Aluminium | ||||
Tensile strength | 200.0 MPa | H111 | EN 573-3, EN 1386 | Strip, Sheet, Plate | ||
20.0 °C | 200.0 MPa | H111 | EN 573-3 | Plate | ||
20.0 °C | 210.0 - 300.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 210.0 - 285.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 210.0 - 270.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 210.0 - 270.0 MPa | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 210.0 - 300.0 MPa | H111 | EN 573-3 | Sheet | ||
20.0 °C | 210.0 - 285.0 MPa | H111 | EN 573-3 | Sheet | ||
20.0 °C | 230.0 - 300.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 230.0 - 285.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 230.0 - 270.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 230.0 - 285.0 MPa | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate | ||
20.0 °C | 230.0 - 300.0 MPa | H111 | EN 573-3 | Sheet | ||
20.0 °C | 230.0 - 270.0 MPa | H111 | EN 573-3 | Sheet | ||
20.0 °C | 245.0 - 300.0 MPa | H111 | EN 573-3 | Sheet, Flat | Transverse | |
20.0 °C | 245.0 - 285.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 245.0 - 270.0 MPa | H111 | EN 573-3 | Sheet | Transverse | |
20.0 °C | 245.0 - 300.0 MPa | H111 | EN 573-3, EN 485 | Strip, Sheet, Plate, Flat | ||
20.0 °C | 245.0 - 285.0 MPa | H111 | EN 573-3 | Sheet | ||
20.0 °C | 245.0 - 270.0 MPa | H111 | EN 573-3 | Sheet |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.5e-05 1/K | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150.0 °C | Typical for Wrought 5000 Series Aluminium |
Melting point | 560.0 - 655.0 °C | Typical for Wrought 5000 Series Aluminium |
Specific heat capacity | 879.0 - 963.0 J/(kg·K) | Typical for Wrought 5000 Series Aluminium |
Thermal conductivity | 112.0 - 205.0 W/(m·K) | Typical for Wrought 5000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 18000000.0 - 31000000.0 S/m | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 3.3e-08 - 5e-08 Ω·m | Typical for Wrought 5000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.3 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Copper | 0.1 - 0.8 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Iron | 0.2 - 1.0 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Magnesium | 3.9 - 4.9 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Manganese | 0.6 - 1.8 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Silicon | 0.55 - 1.4 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Titanium | 0.2 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Zinc | 1.0 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Zirconium | 0.3 % | H111 | EN 573-3, EN 1386, EN 485 | Sheet, Flat, Plate, Strip |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- EN 573-3 AW-6261 H111: High-Quality Food-Safe Age-Hardenable Aluminium Alloy
- EN 573-3 Grade AW-4007 H111: Food‑Safe, Age‑Hardenable Aluminium Alloy
- EN 573-3 Grade AW-2014 H111: High-Strength Precipitation-Hardening Aluminum Alloy
- EN 573-3 AW‑6082 H111: Food‑Safe, Age‑Hardening Aluminum Alloy
- AW-5026 H24 Aluminium Alloy – EN 573-3 Grade, Food‑Safe & High‑Performance
- AW-5026 H34 Aluminium Alloy – EN 573‑3 Grade, Food‑Safe, High Strength
- AW‑5026 O – Food‑Safe, EN 573‑3 Grade AlMg Alloy with High Strength
- EN 573-3 AW‑5010 H111 Aluminium‑Magnesium Alloy – Technical Specifications & Properties
- AW-5088 H111: Premium EN 573-3 Aluminium Alloy for High-Performance Applications
- AW-5070 H111 Aluminum Alloy – EN 573-3 Certified Grade