EN 573-3 Grade AW-2014 H111: High-Strength Precipitation-Hardening Aluminum Alloy
EN AW-2014 is an alloy with strength, machinability and welding capabilities, Aluminum Alloy EN AW-2014 is an excellent option. It is a precipitation hardening alloy that maintains strength after heat treatment.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.8 g/cm³ | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |
20.0 °C | 2.8 g/cm³ | H111 | EN 573-3 | Profile, Rod, Tube |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 73.0 GPa | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
20.0 °C | 72.0 GPa | H111 | EN 573-3 | Profile, Rod, Tube | ||
Elongation | 10.0 % | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | A50 | |
12.0 % | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | A100 | ||
20.0 °C | 10.0 % | H111 | EN 573-3 | Profile, Rod, Tube | A50 | |
20.0 °C | 12.0 % | H111 | EN 573-3 | Profile, Rod, Tube | ||
Hardness, Brinell | 20.0 °C | 45.0 [-] | H111 | EN 573-3 | Profile, Rod, Tube | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 2000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 2000 Series Aluminium | ||||
Shear modulus | 27.4 GPa | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
Tensile strength | 240.0 | H111 | EN 573-3, EN 754 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
250.0 | H111 | EN 573-3, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |||
20.0 °C | 240.0 | H111 | EN 573-3 | Rod, Tube | ||
20.0 °C | 250.0 | H111 | EN 573-3 | Profile, Rod, Tube |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.1e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | |
-50.0 °C | 2.1e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
20 °C | 2.1e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
20 °C | 2.28e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
20 °C | 2.3e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
20 °C | 2.36e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
20 °C | 2.46e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
100 °C | 2.28e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
100.0 °C | 2.28e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
100 °C | 2.3e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
200 °C | 2.36e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
200.0 °C | 2.36e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
300 °C | 2.46e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
300.0 °C | 2.46e-05 1/K | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar, Profile, Rod | ||
Melting point | 505.0 - 635.0 °C | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
510.0 - 640.0 °C | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |||
Specific heat capacity | 816.0 - 963.0 J/(kg·K) | Typical for Wrought 2000 Series Aluminium | ||||
Thermal conductivity | 134.0 - 193.0 W/(m·K) | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | ||
20.0 °C | 140.0 - 200.0 W/(m·K) | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 21000000.0 - 24000000.0 S/m | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |
20.0 °C | 20000000.0 - 29000000.0 S/m | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar | |
Electrical resistivity | 3.45e-08 - 5e-08 Ω·m | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |
4.17e-08 - 4.76e-08 Ω·m | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Copper | 3.9 - 5.0 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Iron | 0.5 % | H111 | EN 573-3 | Profile, Rod, Tube |
0.7 % | H111 | EN 573-3 | Profile, Rod, Tube | |
0.70 % | H111 | EN 573-3, EN 754, EN 755 | Strip, Sheet, Plate, Forging, Tube, Bar | |
Magnesium | 0.2 - 0.8 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Manganese | 0.4 - 1.2 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Nickel | 0.1 | H111 | EN 573-3 | Profile, Rod, Tube |
Silicon | 0.5 - 1.2 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
0.5 - 0.9 % | H111 | EN 573-3 | Profile, Rod, Tube | |
Titanium | 0.15 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Zinc | 0.25 % | H111 | EN 573-3, EN 754, EN 755 | Profile, Rod, Tube, Strip, Sheet, Plate, Forging, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: not suitable, Protective: acceptable | |
| Brazing | hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable | |
| Corrosion properties | Seawater: sufficient, weathering: acceptable | |
| Workability | Bending / Spinning (cold): gut (O) / ungeeignet, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) acceptable (O) / not suitable | |
Metal
- EN 573-3 Grade AW-2014 T6511: High-Strength Aluminum Alloy for Precision Engineering
- EN 573-3 AW-2014 T351 Aluminum Alloy – High Strength, Machinability & Weldability
- EN 573-3 AW‑2014 T3510: High‑Strength, Machinable Aluminum Alloy
- EN 573-3 Grade AW-2014 T3511 – High-Performance Aluminum Alloy
- EN AW-2014 T4510 Aluminum Alloy – High Strength & Versatile Performance
- EN 573-3 Grade AW-2014 T4511 Aluminum Alloy – Superior Strength & Machinability
- EN 573-3 Grade AW-2014 T6510: High-Strength Precipitation-Hardened Aluminum Alloy
- EN 573-3 AW‑6082 H111: Food‑Safe, Age‑Hardening Aluminum Alloy
- AW-5026 H111 Aluminium Alloy – EN 573‑3 Certified Food‑Safe Grade
- EN 573-3 AW‑5010 H111 Aluminium‑Magnesium Alloy – Technical Specifications & Properties