Manufacturing Technology Manufacturing Equipment

Industrial manufacturing

Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |

MfgRobots >> Industrial manufacturing > >> Industrial materials >> Metal

AW-8011A H22 AlFeSi Alloy – EN 573-3 Certified, Food Safe

Naturally hard AlFeSi alloy. The alloy is food safe.

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.71 g/cm³	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil
	20.0 °C	2.71 g/cm³	H22	EN 573-3	Foil, Sheet, Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		70.0 GPa	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil
Hardness, Brinell		35.0 [-]	H22	EN 573-3, EN 485	Strip, Sheet, Plate, Foil
	20.0 °C	35.0 [-]	H22	EN 573-3	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m				Typical for Wrought 8000 Series Aluminium
Poisson's ratio		0.33 [-]				Typical for Wrought 8000 Series Aluminium
Tensile strength	20.0 °C	90.0 - 150.0 MPa	H22	EN 573-3, EN 546, EN 683	Foil, Strip, Sheet, Plate
	20.0 °C	105.0 - 145.0 MPa	H22	EN 573-3, EN 485, EN 541	Sheet, Flat, Strip, Plate, Foil
	20.0 °C	105.0 - 145.0 MPa	H22	EN 573-3	Flat	Transverse

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.35e-05 1/K	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil
	100 °C	2.35e-05 1/K	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil
Melting point		640.0 - 655.0 °C	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil
Specific heat capacity		920.0 J/(kg·K)				Typical for Wrought 8000 Series Aluminium
Thermal conductivity	20.0 °C	210.0 - 220.0 W/(m·K)	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	34000000.0 - 35000000.0 S/m	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Electrical resistivity		2.86e-08 - 2.94e-08 Ω·m	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Strip, Sheet, Plate, Foil

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.1 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Copper	0.1 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Iron	0.5 - 1.0 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Magnesium	0.1 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Manganese	0.1 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Silicon	0.4 - 0.8 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Titanium	0.05 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate
Zinc	0.1 %	H22	EN 573-3, EN 485, EN 541, EN 546, EN 683	Foil, Sheet, Flat, Strip, Plate

Technological properties

Property
Anodizing	decorative: acceptable, Protective: very good
Brazing	hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good
Corrosion properties	Seawater: sufficient, weathering: acceptable
Workability	Bending / Spinning (cold): good / good, Impact extrusion (cold): good, Deep drawing / upsetting (Condition) good (H14) / good (H14)

AW-8011A H18 AlFeSi Alloy – EN 573-3 Certified, Food‑Safe & High‑Strength EN 573-3 AW-5052 F: Premium Aluminum Alloy for Superior Corrosion Resistance

Metal

Composite material

Polymer Materials