Along with sand molding, plaster molding and shell molding, evaporative-pattern casting is a common casting process used in the metalworking industry. Statistics show that it accounts for up to 29% of all aluminum casting performed in the United States. But evaporative-pattern cas

Steel mills, also known as steelworks, are industrial factories that specialize in the production of steel. They typically smelt down iron and carbon, mixing the two together in a specific ratio to create steel. Even if you’re familiar with this general concept, though, ther

1.1213 (Cf53) is a quenched and tempered steel suitable for the flame and Induction hardening. It mainly used in the automotive industry such as axle parts.PropertiesGeneralPropertyValueDensity7.7 g/cm³DimensionPropertyValueCommentDiameter100 mmmax.MechanicalPropertyValueCommentElastic modulus210 GP

With its unique mechanical and chemical properties, molybdenum is an outstanding material that can meet the most exacting requirements. Because molybdenum possesses a very high melting point, a low coefficient of thermal expansion and a high level of thermal conductivity, it is used in many differen

A controlled expansion nickel iron alloy, consisting of nearly 41% nickel, balance iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.12 g/cm³DimensionPropertyValueLength1828 mmThickness4.8 - 7.1 mmWidth381 mmDimensionsAvailable thicknesses: 4.8mm, 7.1mmMechanicalPropertyTemperatureValueC

A controlled expansion nickel iron alloy, consisting of nearly 41% nickel, balance iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.12 g/cm³DimensionPropertyValueLength1727 - 1828 mmThickness0.51 - 10.41 mmWidth342.9 - 609.5 mmDimensionsAvailable dimensions (mm x mm x mm): 0.51x609.6x18

Kovar is a controlled expansion alloy. It is a nickel iron alloy with 29% nickel, 17% cobalt and the remaining balance is iron. The expansion characteristics of Kovar match both borosilicate (or Pyrex) glasses and alumina ceramics, making it one of the most popular of the controlled expansion alloys

Kovar is a controlled expansion alloy. It is a nickel iron alloy with 29% nickel, 17% cobalt and the remaining balance is iron. The expansion characteristics of Kovar match both borosilicate (or Pyrex) glasses and alumina ceramics, making it one of the most popular of the controlled expansion alloys

Invar® is a low expansion alloy consisting of 36% nickel, balance iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.05 g/cm³DimensionPropertyValueCommentDiameter4.8 - 152.4 mmLength3050 - 3660 mmMill random lengthDimensionsAvailable diameters: 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm,

Sandvik 2RE10 is an austenitic stainless steel with extremely low carbon and impurity contents. The grade is characterized by: Excellent resistance to corrosion in nitric acid Excellent resistance to intergranular corrosion Good resistance to pitting Good weldability Sandvik 2RE10 conforms to EN n

Sandvik 2RK65™ is a high-alloy austenitic stainless steel intended for use under severe corrosive conditions within the process industry. The grade is characterized by: Very good resistance to attacks in acidic environments, e.g. sulfuric, phosphoric and acetic acid Very good resistance to pitting

UGI® 4542 is a PH (Precipitation Hardening) martensitic stainless steel used for parts requiring a combination of high strength, high toughness and good corrosion resistance. This stainless steel is unique in that it not only offers excellent corrosion resistance, comparable to that of type 1.4301/

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum AA 2024, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneralPro

The machinability of 1.4104 (X14CrMoS17) is far superior to that of the ferritic 17% chromium steel, 1.4016 as a result of the controlled sulphur addition to this grade of steel. The addition of sulphur however reduces the resistance to corrosion, and as such 1.4016 is significantly more resistant t