Posted On: April 10, 2026 Industries today demand uncompromising accuracy and consistency. Aerospace, medical, and automotive manufacturers require complex components produced to exact specifications that traditional methods struggle to meet reliably. This shift has made CNC machining services e

The steps are as follows. Press “Z-“,the machine will move quickly down to workpiece When the tool near surface of workpiece ,press “Jog Mode”change continue mode to step mode Press “Z-“,the machine will move down step by step When the tool touch surface of workpiece,press “zero X”,”zero Y”and”z

Home » Blog » How to Back To Zero Point In Mach3 Control System Jack Zhang | Founder at Blue Elephant Hi, Im Jack Zhang, here to share my expertise in CNC Machines with you. February 21, 2025 Linkedin Facebook Youtube

The steps are as follows. 1.Open “Mach3 Mill”software. 2.Click “File”,then choose “Load G-Code” 3.Select the file we need. The video is as follow.

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

The steps are as follows. Click “Spindle CW F5″to start spindle. Input the line number we want to start. Press “Enter”,then click “Run From Here” Click “Cycle Start”to start working The video is as follow.

Jack Zhang | Founder at Blue Elephant Hi, Im Jack Zhang, here to share my expertise in CNC Machines with you.

The steps are as follows. Press “Spindle CW F5”,start the spindle Press “+”in spindle speed,let spindle speed up Press pillar is another way to increase or decrease the speedWhen the value of  feed rate is very low,the machine will work slowly Press “Cycle Start”to start work The video is as foll

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

The steps are as follows. Press “Tab”to open “MPG”interface. Press red “—”button to decrease the speed The machine move slowly in low rate Press green “+”button to increase the speed The machine move quickly in high rate The video is as follow.

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

The steps are as follows. The first part is setting of workpiece zero point. 1.Move tool 2.When the tool is near workpiece,press”MODE”button,change “ContinueMode” to “StepMode”. 3.The Z axis will move step by step. 4.Now the tool has touched workpiece,PRESS “X/Y→0”, please notice the coordinate

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

Home » Blog » How To Power On Machine In Syntec 6MB Control System Jack Zhang | Founder at Blue Elephant Hi, Im Jack Zhang, here to share my expertise in CNC Machines with you. February 21, 2025 Linkedin Facebook Youtub

There are two parts. Firstly, measure the length of tool.Secondly, calculate the offset. The steps are as follows. The first part is measuring the length of tool. Press “MDI”,enter MDI mode Select “Monitor” Select “MDI Input” Clear the date and input the tool we needfor example,we need 3 tools.T

Connect With Us Name Phone Email Country Message For any inquiries, don’t hesitate to contact us at: manager@elephant-cnc.com +86 191 0640 1832

The steps are as follows. Please make sure the flash disk has been prepared before operation. First,find the usb interface on the DSP handle,then open it Second,insert the flash drive into the interface 1.Press “MENU”button,then choose “Menu function user interface” press “REF/OK”button 2.Choose

Home » Blog » How To Import The U Disk File In Syntec 6MB Control System Jack Zhang | Founder at Blue Elephant Hi, Im Jack Zhang, here to share my expertise in CNC Machines with you. February 21, 2025 Linkedin Facebook