EN 12163 Grade Cu‑FRTP O60 – Premium 99.9% Oxygenated Copper for Industrial Use
Material Cu-FRTP, mat. No CW006A, is an oxygenous copper-sort of min. 99,90% Cu. It is incomparable to any DIN-mark and it is applicated in the form of plates, sheets, bands, stripes and circular blanks as well as in the form of bars.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 8.9 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 95 - 98 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Elongation | 20.0 °C | 35 % | |
Elongation A10 | 20.0 °C | 30 % | |
Elongation A100 | 20.0 °C | 25 % | |
Hardness, Brinell | 20.0 °C | 35 - 65 [-] | |
Hardness, Vickers | 20.0 °C | 35 - 65 [-] | |
Poisson's ratio | 23.0 °C | 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Shear modulus | 23.0 °C | 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Tensile strength | 20.0 °C | 200 MPa | |
Yield strength Rp0.2 | 20.0 °C | 80 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.6E-5 - 1.8E-5 1/K | Typical for Wrought Copper Pure / Low Alloyed Copper |
Melting point | 965 - 1100 °C | Typical for Wrought Copper Pure / Low Alloyed Copper | |
Specific heat capacity | 23.0 °C | 377 - 420 J/(kg·K) | Typical for Wrought Copper Pure / Low Alloyed Copper |
Chemical properties
| Property | Value |
|---|---|
Copper | 99.9 % |
Oxygen | 0.1 % |
Metal
- EN 12163 Grade CuZn32Pb2AsFeSi – Premium Copper Brass Rods for Industrial Applications
- EN 12163 Copper Alloy CuZn32Pb2AsFeSi (R430) – High Strength Rods
- EN 12163 CuZr TH Grade – High Strength Low‑Alloy Copper Alloy
- EN 12163 Grade CuBe2 M: High-Performance Hardenable Copper Alloy
- EN 12163 Grade CuZn10 M – High-Strength, Corrosion-Resistant Copper Alloy
- EN 12163 CuZn40 M: High-Performance Unhardenable Wrought Copper Alloy
- EN 12163: Grade CuZn33 M – High-Strength Unhardenable Wrought Copper Alloy
- EN 12163 Grade CuZn36 M – Premium Unhardenable Copper Alloy for Precision Deep Drawing
- EN 12163 Grade Cu‑FRTP O60 – Premium 99.9% Oxygenated Copper for Industrial Use
- EN 12163 Grade Cu-DLP O60 – Premium Deoxidized Copper for Advanced Applications