EN 12163 Cu-DLP H075: Premium Deoxidized Copper for High-Performance Applications
Cu-DLP, mat. No CW023A, is a deoxidized copper with limited, low residual copper-content. To the comparable DIN-make SW-Cu, mat. No 2.0076 acc. to DIN 1787 : 1973-01 applies: Tensile strength and Brinell hardness are increasable by cold forming. SW-Cu is hydrogen resistant and shows the lowest thermal and electrical conductivity of the pure copper materials. Processing properties: hot forming: very good cold forming: very good machinability: unfavorable hard soldering: very good soft soldering: very good gas-shielded welding: good burnishing: very good Application: Preferably in apparatus engineering and construction trade. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 8.9 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 20.0 °C | 129 GPa | |
Hardness, Brinell | 20.0 °C | 75 - 100 [-] | |
Hardness, Vickers | 20.0 °C | 80 - 105 [-] | |
Poisson's ratio | 23.0 °C | 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Shear modulus | 23.0 °C | 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.6E-5 - 1.8E-5 1/K | Typical for Wrought Copper Pure / Low Alloyed Copper |
Melting point | 965 - 1100 °C | Typical for Wrought Copper Pure / Low Alloyed Copper | |
Specific heat capacity | 20.0 °C | 385 J/(kg·K) | |
Thermal conductivity | 20.0 °C | 352 W/(m·K) |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical conductivity | 20.0 °C | 5.20E+7 S/m |
Electrical resistivity | 20.0 °C | 1.9E-8 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Bismuth | 5E-4 % |
Copper | 99.9 % |
Lead | 5E-3 % |
Phosphorus | 0.01 % |
Metal
- EN 1652 Grade Cu-DLP H040: Premium Deoxidized Copper for High-Performance Applications
- EN 12163 Grade Cu-DLP R200 – Premium Wrought Copper for Engineering Applications
- EN 12163 Grade Cu-DHP H075: High-Purity Phosphoric Copper for Superior Performance
- EN 12163 Cu-DLP H085 – Premium Deoxidized Copper for High-Performance Applications
- EN 12163 Grade Cu-DLP H100 – Premium Deoxidized Copper with Superior Strength & Cold Forming
- EN 12163 Grade Cu-DLP H065 – High-Performance Deoxidized Copper for Precision Engineering
- Cu-DLP R250 – Premium Deoxidized Copper with Enhanced Strength & Formability
- EN 12163 Grade Cu-DLP R300: Premium Deoxidized Copper for Advanced Applications
- EN 12163 Grade Cu-DLP R350 – High-Performance Deoxidized Copper
- EN 12163 Grade Cu-DLP O60 – Premium Deoxidized Copper for Advanced Applications