EN 12451 CuZn30As O60 – Copper Brass Seamless Tube Grade

CuZn28Sn1As (CW706R former identification: CuZn28Sn1) is an unhardenable copper alloy. High hardness and strength parameter are achievable by cold forming only. Tin increases corrosion resistance and improves sliding qualities. CuZn28Sn1As is dezincification resistant and resistant to river and indu

CuSn4, mat. No. CW450K, is comparable to the DIN-make CuSn4, mat. No. 2.1016, acc. to DIN 17662 : 1983-12. The material is specified by a favorable combination of very good cold formability with strength and hardness. It is corrosion resistant, good soft and hard solderable and shows still good elec

CuZn20Al2As (CW702R former identification: CuZn20Al2) is an unhardenable copper alloy. High hardness and strength values are achievable by cold forming only. Strength properties, corrosion resistance and oxidation resistance are increasable by Al-addition. CuZn20Al2As is seawater and dezincification

Cu-DLP, mat. No CW023A, is a deoxidized copper with limited, low residual copper-content. To the comparable DIN-make SW-Cu, mat. No 2.0076 acc. to DIN 1787 : 1973-01 applies: Tensile strength and Brinell hardness are increasable by cold forming. SW-Cu is hydrogen resistant and shows the lowest therm