BS 4360 Grade 50D – Technical Specifications & Key Properties
Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 200 - 215 GPa | Typical for Low Carbon Steel |
Elongation | 23.0 °C | 20 % | |
Poisson's ratio | 23.0 °C | 0.29 [-] | Typical for Low Carbon Steel |
Shear modulus | 23.0 °C | 82 GPa | Typical for Low Carbon Steel |
Tensile strength | 23.0 °C | 490 - 640 MPa | |
Yield strength | 23.0 °C | 305 - 355 MPa |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.32E-5 - 1.38E-5 1/K | Typical for Low Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel | |
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel | |
Specific heat capacity | 23.0 °C | 465 J/(kg·K) | Typical for Low Carbon Steel |
Thermal conductivity | 23.0 °C | 25 - 93 W/(m·K) | Typical for Low Carbon Steel |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical resistivity | 23.0 °C | 1.43E-7 - 1.74E-7 Ω·m | Typical for Carbon Steel |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.18 % |
Manganese | 1.5 % |
Niobium | 0 - 0.1 % |
Phosphorus | 0.04 % |
Silicon | 0.1 - 0.5 % |
Sulfur | 0.04 % |
Vanadium | 0 - 0.1 % |
Metal
- ASTM A514 Grade F Low-Carbon Steel – Key Properties & Applications
- EN 1652 CuCo1Ni1Be TH – High-Performance Copper Alloy for Industrial Applications
- EN 12163 CuZr TH Grade – High Strength Low‑Alloy Copper Alloy
- EN 12163 Grade CuBe2 M: High-Performance Hardenable Copper Alloy
- EN 12163 Grade CuZn10 M – High-Strength, Corrosion-Resistant Copper Alloy
- EN 10305-5 Grade St 33 Welded Precision Steel Tubes
- BS 4360 Grade 50D – Technical Specifications & Key Properties
- BS 3100 Grade A1 Steel Specifications & Properties
- WL 3.2364 T5: Superior Weldable Cast Alloy for High-Integrity Applications
- BS 4360 Grade 43A Hot Rolled Steel – Low‑Carbon, Cost‑Effective Solution