EN 10225 S355G13 Quenched & Tempered Steel – Optimal for Offshore Structures

The free-cutting steel 46SPb20, suitable for quenching and tempering, is used for bulk parts of higher strength, especially for lower requirements to ductility in transversal direction opposite to comparable C-steels (e.g. C45). Machinability enhancement is achievable by Pb-content. Application in a

The make X12Cr13 is comparable to X 10 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for construction parts in water and steam and mild acting media of food industry, predominantly in tempered condition (fitting parts, valve spindles, shafts, pump components, bolts, screws) with hone

Make X20Cr13 is comparable to X 20 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for construction parts of higher strength and higher mechanical load, such as axles, shafts, pump components, piston rods, valve cones, nozzle needles, ship`s propeller, but also beater bars, surgical in

Make X30Cr13 is comparable to X 30 Cr 13 acc. to DIN 17440 : 1985-07. The material is applicated for the production of cutting tools (knife blades, scissors, cutting surgical instruments), bearing balls, wear resistant construction parts for control and pump components, springs, piston rods, screws.