home Manufacturing Technology Manufacturing Equipment
Industrial manufacturing
Industrial Internet of Things | Industrial materials | Equipment Maintenance and Repair | Industrial programming |
home  MfgRobots >> Industrial manufacturing >  >> Industrial materials >> Metal

EN 10222-5 X2CrNiN18-10 – Solution Annealed + AT: High‑Performance Austenitic Stainless Steel

The austenitic CrNi_steel X2CrNiN18-10 shows by N-alloying an increased yield stress which also persists at higher temperatures. This is used in pressure vessel construction and for leightweight constructions. Improved corrosion resistance due to the N-content. The material is also in sensitized condition resistant to intercrystalline corrosion. To the comparable trademark X 2 CrNiN 18 10 acc. to DIN 17440 : 1985-07 applies: the material is suitable for chemical apparatus engineering owing to its resistance to nitric acid and other oxidizing media. It is approved in pressure vessel construction up to 300 °C., above 300 °C. subject to authorization. The steel is well cold formable and suitable for mirror finishing. Excellent suitability for refrigeration up to -270 °C.due to its low temperature toughness.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.9 - 7.93 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

-100.0 °C

206 GPa

20.0 °C

196 - 200 GPa

100.0 °C

190 - 194 GPa

200.0 °C

182 - 186 GPa

300.0 °C

174 - 179 GPa

400.0 °C

166 - 172 GPa

500.0 °C

158 - 165 GPa

600.0 °C

150 GPa

700.0 °C

142 GPa

800.0 °C

134 GPa

900.0 °C

127 GPa

1000.0 °C

120 GPa

Elongation

20.0 °C

35 - 45 %

Poisson's ratio

23.0 °C

0.3 [-]

Typical for Austenitic Stainless Steel

Shear modulus

23.0 °C

77 GPa

Typical for Austenitic Stainless Steel

Tensile strength

20.0 °C

550 - 750 MPa

Yield strength Rp0.2

20.0 °C

270 MPa

Yield strength Rp1.0

20.0 °C

305 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

-100.0 °C

1.49E-5 1/K

20.0 °C

1.61E-5 1/K

100.0 °C

1.6E-5 - 1.67E-5 1/K

200.0 °C

1.65E-5 - 1.72E-5 1/K

300.0 °C

1.7E-5 - 1.77E-5 1/K

400.0 °C

1.75E-5 - 1.81E-5 1/K

500.0 °C

1.8E-5 - 1.84E-5 1/K

600.0 °C

1.88E-5 1/K

700.0 °C

1.91E-5 1/K

800.0 °C

1.94E-5 1/K

900.0 °C

1.97E-5 1/K

1000.0 °C

2E-5 1/K

Max service temperature, long

-270 - 300 °C

Melting point

1230 - 1480 °C

Typical for Austenitic Stainless Steel

Specific heat capacity

-100.0 °C

440 J/(kg·K)

20.0 °C

472 - 500 J/(kg·K)

100.0 °C

487 J/(kg·K)

200.0 °C

503 J/(kg·K)

300.0 °C

512 J/(kg·K)

400.0 °C

520 J/(kg·K)

500.0 °C

530 J/(kg·K)

600.0 °C

541 J/(kg·K)

700.0 °C

551 J/(kg·K)

800.0 °C

559 J/(kg·K)

900.0 °C

565 J/(kg·K)

1000.0 °C

571 J/(kg·K)

Thermal conductivity

20.0 °C

14.3 - 15 W/(m·K)

100.0 °C

15.8 W/(m·K)

200.0 °C

17.5 W/(m·K)

300.0 °C

19 W/(m·K)

400.0 °C

20.5 W/(m·K)

500.0 °C

21.9 W/(m·K)

600.0 °C

23.3 W/(m·K)

700.0 °C

24.6 W/(m·K)

800.0 °C

26 W/(m·K)

900.0 °C

27.4 W/(m·K)

1000.0 °C

28.8 W/(m·K)

Thermal diffusivity

20.0 °C

3.8 mm²/s

100.0 °C

4 mm²/s

200.0 °C

4.2 mm²/s

300.0 °C

4.6 mm²/s

400.0 °C

4.8 mm²/s

500.0 °C

4.9 mm²/s

600.0 °C

5 mm²/s

700.0 °C

5.3 mm²/s

800.0 °C

5.6 mm²/s

900.0 °C

5.9 mm²/s

1000.0 °C

6 mm²/s

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

7.1E-7 Ω·m

100.0 °C

7.76E-7 Ω·m

200.0 °C

8.49E-7 Ω·m

300.0 °C

9.14E-7 Ω·m

400.0 °C

9.71E-7 Ω·m

500.0 °C

1.02E-6 Ω·m

600.0 °C

1.07E-6 Ω·m

700.0 °C

1.1E-6 Ω·m

800.0 °C

1.14E-6 Ω·m

900.0 °C

1.17E-6 Ω·m

1000.0 °C

1.19E-6 Ω·m

Chemical properties

PropertyValue

Carbon

0.03 %

Chromium

17 - 19.5 %

Manganese

2 %

Nickel

8.5 - 11.5 %

Nitrogen

0.12 - 0.22 %

Phosphorus

0.05 %

Silicon

1 %

Sulfur

0.015 %


Metal

  • Metal
  • Resin
  • fiber
  • Composite material
  • Nanomaterials
  • Polymer Materials
  • Biologics
  • Dye
  • Spices
    1. EN 10222-5 X2CrNi18-9 Solution-Annealed Steel (+AT) – High Corrosion & Mechanical Strength
    2. EN 10222-5 Grade X2CrNiCu19-10 – Solution Annealed Stainless Steel (AT)
    3. EN 10222-5 Grade X2CrNiMo17-12-3: Solution Annealed + AT – Premium Austenitic Steel
    4. EN 10222-5 X3CrNiMo18-12-3 – Solution Annealed Stainless Steel, Ideal for Pressure Vessels
    5. EN 10222-5 Grade X7CrNiNb18-10 – Solution-Annealed Stainless Steel for Corrosion‑Resistant Pressure Vessels
    6. EN 10222‑5 X6CrNiTiB18‑10 Solution‑Annealed Steel for High‑Temperature Applications
    7. EN 10222-5 Grade X2CrNiMoN17-11-2 – Solution Annealed Steel with Enhanced Corrosion Resistance
    8. EN 10222-5 X5CrNiMo17-12-2: Solution-Annealed Austenitic Steel for Chemical & Pharmaceutical Use
    9. EN 10222-5 Grade X6CrNi18-10 (Solution Annealed + AT): High‑Temperature Austenitic Steel for Reactor, Boiler, and Chemical Applications
    10. EN 10222-5 X6CrNiNb18-10 – Solution Annealed Steel with Superior Corrosion Resistance