AW-6060 F Aluminium Alloy – EN 573-3 Certified Grade
Additional services: Cuttings, Parts from drawings
Properties
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Density | 2.7 g/cm³ | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Mechanical
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Elastic modulus | 69.5 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Hardness, Brinell | 35.0 [-] | F | EN 573-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | |||
Poisson's ratio | 0.33 [-] | Typical for Wrought 6000 Series Aluminium | |||
Shear modulus | 26.1 GPa | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Tensile strength | 120.0 - 190.0 MPa | F | EN 573-3, EN 1715-3 | Strip, Sheet, Plate, Tube, Bar |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.18e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
20 °C | 2.18e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.3399999999999996e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.45e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
20 °C | 2.56e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
100 °C | 2.3399999999999996e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
200 °C | 2.45e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
300 °C | 2.56e-05 1/K | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Melting point | 585.0 - 650.0 °C | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Specific heat capacity | 898.0 J/(kg·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar | |
Thermal conductivity | 200.0 - 220.0 W/(m·K) | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Electrical
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Electrical conductivity | 28000000.0 - 31000000.0 S/m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Electrical resistivity | 3.23e-08 - 3.57e-08 Ω·m | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.05 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Copper | 0.1 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Iron | 0.1 - 0.3 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Magnesium | 0.35 - 0.6 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Manganese | 0.1 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Silicon | 0.3 - 0.6 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Titanium | 0.1 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Zinc | 0.15 % | F | EN 573-3, EN 1715-3, EN 570 | Strip, Sheet, Plate, Tube, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: EQ: sehr gut, Protective: very good | |
| Brazing | hard brazing (with flux/ without flux): very good / good, friction soldering: very good, soft brazing with flux: good | |
| Corrosion properties | Seawater: good, weathering: very good | |
| Workability | Bending / Spinning (cold): acceptable (T3, T4) / -, Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) - / good (O) | |
Metal
- EN 573-3 Grade 3.0515 O3 – Key Mechanical & Thermal Properties
- AW-4043A O3 – EN 573-3 Certified 4000 Series Aluminium
- EN 573-3 Grade AW-4047A O3 Aluminium Alloy Specifications
- EN 573-3 AW-5556A F – High-Performance 5000 Series Aluminium Alloy
- EN 573-3 Certified AW-5556A O3 Aluminum Grade
- EN 573-3 AW‑5087 F Aluminum Grade: Key Properties & Standards
- AW-5087 O3 Aluminium Alloy – EN 573-3 Certified Properties
- AW-1110F Aluminium Grade – EN 573-3 Compliance & Properties
- EN 573-3 Grade AW-1198: Food‑Safe Aluminum with Superior Strength and Toughness
- EN 573‑3 AW‑1200 Aluminium Alloy – Food‑Safe, High‑Performance Sheets, Bands & Plates