DIN 5512-2 Grade DC01: Skin Passed – Compliance Confirmed

The soft non-alloy steel RRSt 3 is suited for cold forming and is offered in different conditions (K to K60) with different strength and depth indications. The steel is applicated in the plant and tool engineering. Free from stretcher lines for 4 weeks is garuanteed in the LG and K32 condition. No s

The steel X 6 CrNiMoTi 17 12 2 is well suited for cold-forming, one must be aware of the increased cold strain hardening compared to carbon steels. Cold forming is worse than for X 5 CrNiMo 17 12 2. Its increased corrosion resistance to non-oxidizing acids and substances containing halogen allow it

The steel X 6 CrNiTi 18 10 is well suited for cold-forming, however, one must be aware of the increased cold strain hardening compared to carbon steels. Cold-forming is not as good as with steel X 5 CrNi 18 12. The steel is used in chemical eqiupment construction, the fat- and soap industries for st

Cold rolled uncoated low carbon steel narrow strip for cold forming.,The non-alloy steel DC06 (IF18) is suitable for highest deformation requirements and complex cold formed components. Products made of DC06 do not show any stretcher strains. Welding: DC06 is weldable by the following welding method