EN 573-3 AW‑1098 H112: Premium Food‑Safe Aluminum Alloy
Food safe aluminum.
Properties
General
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Density | 2.7 g/cm³ | H112 | EN 573-3 | Strip, Sheet, Plate | |
20.0 °C | 2.7 g/cm³ | H112 | EN 573-3 | Tube |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | -270 °C | 70.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
-270.0 °C | 70.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | ||
20 °C | 70.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | ||
20.0 °C | 70.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | ||
20.0 °C | 70.0 - 72.0 GPa | H112 | EN 573-3 | Tube | ||
50.0 °C | 69.0 GPa | H112 | EN 573-3 | Tube | ||
100.0 °C | 68.0 GPa | H112 | EN 573-3 | Tube | ||
150.0 °C | 66.0 GPa | H112 | EN 573-3 | Tube | ||
200.0 °C | 63.0 GPa | H112 | EN 573-3 | Tube | ||
250.0 °C | 57.0 GPa | H112 | EN 573-3 | Tube | ||
300 °C | 50.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | ||
300.0 °C | 50.0 GPa | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | ||
Elongation | 27.0 % | H112 | EN 573-3 | Strip, Sheet, Plate | ||
20.0 °C | 27.0 % | H112 | EN 573-3 | Tube | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] | Typical for Wrought 1000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 25.0 - 26.5 GPa | H112 | EN 573-3 | Tube | |
Tensile strength | 40.0 MPa | H112 | EN 573-3 | Strip, Sheet, Plate | ||
20.0 °C | 40.0 MPa | H112 | EN 573-3 | Tube |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.18e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube |
-50.0 °C | 2.18e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
20 °C | 2.18e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
20 °C | 2.35e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate | |
20 °C | 2.45e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
20 °C | 2.55e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
100 °C | 2.35e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate | |
100.0 °C | 2.36e-05 1/K | H112 | EN 573-3 | Tube | |
200 °C | 2.45e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
200.0 °C | 2.45e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
300 °C | 2.55e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
300.0 °C | 2.55e-05 1/K | H112 | EN 573-3 | Strip, Sheet, Plate, Tube | |
Melting point | 660.0 °C | H112 | EN 573-3 | Strip, Sheet, Plate | |
Specific heat capacity | 900.0 J/(kg·K) | H112 | EN 573-3 | Strip, Sheet, Plate | |
20.0 °C | 900.0 J/(kg·K) | H112 | EN 573-3 | Tube | |
Thermal conductivity | 232 W/(m·K) | H112 | EN 573-3 | Strip, Sheet, Plate | |
20.0 °C | 215.0 - 227.0 W/(m·K) | H112 | EN 573-3 | Tube |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
Electrical conductivity | 37500000.0 - 37700000.0 S/m | H112 | EN 573-3 | Strip, Sheet, Plate | |
20.0 °C | 37600000.0 - 37800000.0 S/m | H112 | EN 573-3 | Tube | |
Electrical resistivity | 2.65e-08 - 2.67e-08 Ω·m | H112 | EN 573-3 | Strip, Sheet, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Aluminium | 99.98 % | H112 | EN 573-3 | Tube, Strip, Sheet, Plate |
Copper | 0.003 % | H112 | EN 573-3 | Tube, Strip, Sheet, Plate |
Iron | 0.006 % | H112 | EN 573-3 | Tube |
0.006 % | H112 | EN 573-3 | Strip, Sheet, Plate | |
Silicon | 0.01 % | H112 | EN 573-3 | Tube, Strip, Sheet, Plate |
Titanium | 0.003 % | H112 | EN 573-3 | Tube, Strip, Sheet, Plate |
Zinc | 0.015 % | H112 | EN 573-3 | Tube, Strip, Sheet, Plate |
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good, general: very good | |
| Corrosion properties | Seawater: acceptable, weathering: good | |
| Workability | Bending / Spinning (cold): very good | |
Metal
- EN 573-3 Grade 3.0515 O3 – Key Mechanical & Thermal Properties
- AW-4043A O3 – EN 573-3 Certified 4000 Series Aluminium
- EN 573-3 Grade AW-4047A O3 Aluminium Alloy Specifications
- EN 573-3 AW-5556A F – High-Performance 5000 Series Aluminium Alloy
- EN 573-3 Certified AW-5556A O3 Aluminum Grade
- AW-1098 F Aluminium – EN 573-3 Grade & Core Mechanical Properties
- EN 573-3 Grade AW-1098 H111 – Food Safe Aluminum for Industrial Use
- EN 573-3 AW-5050A H112 Aluminum – Food‑Safe, High‑Strength Sheet & Strip
- AW-3102 H112 – EN 573-3 Grade Aluminium Alloy with Superior Strength
- EN 573-3 Grade AW-1098 O – Food Safe Aluminum with High Strength and Corrosion Resistance